ERIC Charger Cleaning

[FLBeachBum]

I got a used ERIC Charger with my cart and it is covered in dirt, can I use a damp brush on it to clean it up some?

Also is it possible to order new rubber feet? 3/4 are missing.. I know it's a small detail but it bugs me.

[Fairtax4me]

Yep, the ERIC charger is waterproof except for the AC plug connector, and the USB port.
As long as he cover for the USB port is clean and is properly covering the port, you can spray it with a water hose using a light pressure setting. Just be sure to thoroughly dry inside the AC connector before plugging the AC cord back to the charger. And make sure no water got into the USB port.
If you have a hard time getting into the gaps between the fins try scrubbing with a bristle brush and blow them out with compressed air.

I'm sure you can get the rubber feet somewhere, but getting them through a dealer is probably expensive. Check amazon or maybe your local hardware store.

[FLBeachBum]

Originally Posted by Fairtax4me

Yep, the ERIC charger is waterproof except for the AC plug connector, and the USB port.
As long as he cover for the USB port is clean and is properly covering the port, you can spray it with a water hose using a light pressure setting. Just be sure to thoroughly dry inside the AC connector before plugging the AC cord back to the charger. And make sure no water got into the USB port.
If you have a hard time getting into the gaps between the fins try scrubbing with a bristle brush and blow them out with compressed air.

I'm sure you can get the rubber feet somewhere, but getting them through a dealer is probably expensive. Check amazon or maybe your local hardware store.

Thanks for the info, I will try it out tonight! Yeah I figured the feet would be an ACE Hardware trip.