03-08-2016, 10:57 PM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 11
|
New guy, new problems
Just rebuilt my robin ec252pg, runs very well..well ran. I went to show my buddy what was "under the seat" and he pointed out there was a missing bolt...here, here, here here....well u get the picture.
Turns out something isnt really "balanced" per se, but i took it apart and apparently in my neanderthal brain while trying to get the fan off, I caused a nice chunk to break off. And since that was broke off i assume its what caused alot of hell in there. Along with that i looked at the headbolts and 2 of the 3 headbolts for the mouting of the motor were broke...hoping the fan was the culprit. Since im a newbie, if anyone has any leads on where to get a new fan and those headbolts that would be great! Thanks, Stew |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-10-2016, 08:07 PM | #2 |
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: New guy, new problems
Check the sponsors here and the parts section at the bottom of the home page.. You said head bolts for the mounting of the motor.. Is it the cylinder head bolts or the engine mounting bolts?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
OBC problems | Electric Club Car | |||
possble battery problems or possible charger problems? | Extreme DC! | |||
6 passanger trouble shooting. Controller problems/gas/or brake problems. | Electric EZGO | |||
86 G1 Still Has problems... | Gas Yamaha |