81 g1 gas yam

makobuggie · 01-19-2015, 06:07 AM

Hello everyone, i need a little help on the starter, gen, tensioner , can someone please post a pick of one? I had to many people that was working on the starter, i think its not the way it should be? The tensioner, thanks

slonomo · 01-22-2015, 08:37 AM

Not sure what you need, but here's the only photos I have.

slonomo · 01-22-2015, 09:48 AM

Did a quick google search, here's what I found. Hope this helps.

Edited: refer to next post

After a little digging, it appears that the 1979-1981 models used the spring tensioner, which are not available any longer. The newer version is a bracket, which likely works much better.

slonomo · 01-22-2015, 09:50 AM

This link is for Yamaha Parts website. You can look at all the parts in an exploded view and see how the parts fit together.

https://www.yamahapartsandaccessorie...EY_(G1A_-_1979)

slonomo · 01-22-2015, 04:17 PM

Those bolts are avail from Yamaha. Size of the bolts are definitely metric. You could prob make a good guess at the size, get some bolts, take them back and switch them out if they aren't the right thread pitch. Or buy an assortment like I did and you'll have some extras. You never know when you'll need an extra bolt or two.

01-19-2015, 06:07 AM	#1
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389	81 g1 gas yam Hello everyone, i need a little help on the starter, gen, tensioner , can someone please post a pick of one? I had to many people that was working on the starter, i think its not the way it should be? The tensioner, thanks
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389

01-22-2015, 09:48 AM	#3
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,436	Re: 81 g1 gas yam Did a quick google search, here's what I found. Hope this helps. Edited: refer to next post After a little digging, it appears that the 1979-1981 models used the spring tensioner, which are not available any longer. The newer version is a bracket, which likely works much better.

01-22-2015, 04:17 PM	#5
slonomo Searching for The Way Join Date: Oct 2009 Location: Medina, Ohio (NEOHIO) Posts: 11,436	Re: 81 g1 gas yam Those bolts are avail from Yamaha. Size of the bolts are definitely metric. You could prob make a good guess at the size, get some bolts, take them back and switch them out if they aren't the right thread pitch. Or buy an assortment like I did and you'll have some extras. You never know when you'll need an extra bolt or two.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum