|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
01-29-2015, 03:19 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2010
Location: salina ks
Posts: 161
|
G2 Rearend
Removed the governor on the rearend and having a hard time deciding how i should plug the hole. Any suggestions
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-29-2015, 06:12 PM
|
#2 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G2 Rearend
Thread the hole and plug it with a bolt...
|
|
|
|
|
01-29-2015, 06:34 PM
|
#3 |
|
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 Rearend
If you thread it without disassembly,put grease on the tap to hold the chips,I did the same thing on mine,I think it was a 3/8"-bolt.
 |
|
|
|
|
01-30-2015, 05:33 PM
|
#4 |
|
Gone Wild
Join Date: Jul 2010
Location: salina ks
Posts: 161
|
Re: G2 Rearend
Crap just put it back under the cart. thanks guys for the idea
|
|
|
|
|
01-30-2015, 07:10 PM
|
#5 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G2 Rearend
|
|
|
|
|
01-31-2015, 08:51 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: G2 Rearend
Get a rubber plug and take it to the grinder. Grind it with a slight bigger lip on the end that will be inside the case inside and the part fits thru the hole just a tight fit. Then push it into the hole.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 Rearend | Gas Yamaha | |||
| G2 rearend | Gas Yamaha | |||
| rearend oil | Gas golf carts | |||
| G9 rearend | Gas Yamaha | |||
| g16 rearend need | Gas Yamaha | |||
Linear Mode
