|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-04-2015, 10:51 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2014
Location: South Central Indiana
Posts: 6
|
G9 Valve Cover Breather Tube
Is there any way of stopping oil from being pushed out this tube?
I have a K&N filter on it but it is still seeping out a little. Me likes me engine clean..... |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-04-2015, 01:03 PM
|
#2 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: G9 Valve Cover Breather Tube
Put your throttle foot on a diet. Jk you will have what is called blow by from high rpms whenever governor is raised or bypassed
|
|
|
|
|
05-04-2015, 05:31 PM
|
#3 |
|
Gone Wild
Join Date: Mar 2014
Location: Bountiful, Utah
Posts: 884
|
Re: G9 Valve Cover Breather Tube
If you can't stop it maybe you could hook a hose to it and reroute it so it goes under the cart??
|
|
|
|
|
05-04-2015, 06:08 PM
|
#4 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: G9 Valve Cover Breather Tube
It's very common on yamaha rhino and Kawasaki teryx side x sides when I was an avid follower. There solution was what is called a catch can mod. You plug off the hole in the air box and use a small canister and run your hose to it with another hose coming out to vent the vapors with a 1 way style valve. Just google the phrase " yamaha rhino catch can mod"
|
|
|
|
|
05-05-2015, 10:19 AM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2014
Location: South Central Indiana
Posts: 6
|
Re: G9 Valve Cover Breather Tube
I like this idea....keeps me garage floor clean.....
 |
|
|
|
|
05-06-2015, 10:24 PM
|
#6 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G9 Valve Cover Breather Tube
You can buy them for gokarts also so they don't drip on the track. Those fumes stink too, if the can works you may want to vent it to the airbox again. Mine was doing this when hot before I put the clone in it. Well it started smoking oil eventually and I pulled it out, still ran fine.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| oil in breather tube? | Gas EZGO | |||
| Breather tube for workhorse | Gas EZGO | |||
| G14 valve cover tube | Gas Yamaha | |||
| Losing oil through breather tube | Gas Yamaha | |||
| breather tube | Gas Columbia ParCar | |||
Linear Mode
