|
07-08-2018, 11:20 AM
|
#1 |
|
Getting Wild
 Join Date: Oct 2012
Location: IL.
Posts: 87
|
01 ds new belts
Replaced both belts , now have belt squeak and very grabby starting and moving , It seems to be the new belt is too tight , it is the HD belt , Lockman , need your help again . Thanks , Kevin
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2018, 11:25 AM
|
#2 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 01 ds new belts
Who... me?
 Most belt squeaking usually comes from the S/G belt at start up, it could be too loose! If the drive belt jerks and squeaks at start out, give it some time to break in and you should be fine!  |
|
|
|
|
07-08-2018, 11:43 AM
|
#3 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 01 ds new belts
Out of curiosity Kevin... What's the part number of the SD drive belt you installed?
|
|
|
|
|
07-20-2018, 01:25 PM
|
#4 |
|
Getting Wild
Join Date: Oct 2012
Location: IL.
Posts: 87
|
Re: 01 ds new belts
DBCC7189 , You are the best , Kevin .
|
|
|
|
|
07-22-2018, 03:11 PM
|
#5 |
|
Getting Wild
Join Date: Oct 2012
Location: IL.
Posts: 87
|
Re: 01 ds new belts
There is also a radical difference between crank and move . Jerky . SG belt is new also , and tight . Thank you, Kevin .
|
|
|
|
|
07-27-2018, 06:10 AM
|
#6 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 01 ds new belts
The 7189 is the right size for your cart, I have the 7188 on mine (1/8" shorter)
It will have a pretty good jerk at start out, eventually you'll learn how to feather the pedal until the belt gets broken in! That's normal for the severe duty drive belts!  |
|
|
|
|
07-27-2018, 11:26 AM
|
#7 |
|
Getting Wild
Join Date: Oct 2012
Location: IL.
Posts: 87
|
Re: 01 ds new belts
Should I look for a different belt ? The wife is not liking this at all . Feathering does not help . When it starts , it is very grabby . Is it the clutch ? Thanks , Kevin .Is there any adjustment that could be made ?
|
|
|
|
|
07-28-2018, 06:42 AM
|
#8 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 01 ds new belts
There is no adjustment to loosen the belt on 96+ carts!
and maybe... MAYBE... you might need drive clutch buttons, but only IF the drive clutch "clunks" into position at start out, the easiest way to determine that is to run it in maintenance mode and see if the clutch "jumps" into the belt, rather than smoothly "gliding" into it. All else fails? go back to a stock drive belt.  |
|
|
|
|
07-28-2018, 09:02 AM
|
#9 |
|
Getting Wild
Join Date: Oct 2012
Location: IL.
Posts: 87
|
Re: 01 ds new belts
Yes, clunk is the right word . I have 0 knowledge with this . What do you advise for clutch rebuild and who ? The shops around here are gougers and it is not right when you get it back . Should I call CPP . Thanks man you are my hero ! Kevin .
|
|
|
|
|
07-28-2018, 09:21 AM
|
#10 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: 01 ds new belts
The buttons are pretty easy to replace yourself, but if you feel uncomfortable about doing it, then yeah, CPP can it for you!
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Belts? | Gas Club Car | |||
| Belts | Gas Yamaha | |||
| What Belts? | Sled Engine Swaps | |||
| 81, g1, belts | Gas Yamaha | |||
| Belts and more Belts | Gas EZGO | |||
Linear Mode
