|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-04-2012, 08:46 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 3
|
79 G1 Lower end crank questions
I recently bought a cart cheap... I had it running for a few days and noticed that the clutch would move up and down quite a bit when i shook it so i have torn down the engine and case waiting on a puller so I have it as far apart as I can with out taking the clutch off yet. So I'm wondering if the bearings are all the same and it says it takes 3? is there 2 bearings on the clutch side>? are all 3 the same size? and are they the same on all the G1 215cc motors? are the seals all the same? I want to order the parts but having trouble finding them or mabey they are the same.... Id like to use ebay with pay-pal if possible...I believe its a 1979 as the serial j10- between 00101 and 004etc... Thanks for the help in advance..
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2012, 02:51 AM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 79 G1 Lower end crank questions
Welcome to BGW Your correct!! there are 2 bearings on the clutch side and 1 on the fan side and they are the same size. As for seals they are also the same left and right side. When installing lube the shaft a bit and the rubber seal lip then put a bit of blue loctite on the outer seal edge to keep it in place.
LOU |
06-05-2012, 08:24 AM | #3 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: 79 G1 Lower end crank questions
I am a little confused (which happens often). Are you sure you have an EZGO? All this talk of G1 and 215 cc motors sounds ever so Yamaha - ish to me.
Dave |
|
|
Similar Threads | ||||
Thread | Forum | |||
How would you lower this? | On Road Golf Carts! | |||
Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic) | Gas EZGO | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha | |||
Lower the EZ way | Electric EZGO | |||
Before I change crank seals:questions | Gas Yamaha |