|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-13-2014, 09:07 AM | #11 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: proper way to eliminate governor?
I had to adjust the cable from the governor to the carb to allow the carb to open all the way. Runs alot better and more responsive.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-13-2014, 10:30 AM | #12 |
Gone Wild
Join Date: Sep 2013
Posts: 247
|
Re: proper way to eliminate governor?
I still have a few threads left, run 23mph,,, stock g16,, what I found was my gas pedal was hitting the plastic behind it,, I took off the pedal ,from under and turned it just I tooth set. now at floored it is about 1 inch from hitting, that was about 3mph right there. I did feel the linkage at the carb, before I did this, at floored it was not going wide open, I think the cable stretches in time an causes the pedal to bottom out,,before the carb opens completely''
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
How to Eliminate Governor on 1989 3PG | Gas EZGO | |||
Eliminate Key Switch? | Electric Club Car | |||
eliminate gas pedal start switch | Gas golf carts | |||
How to correctly eliminate OBC | Electric Club Car | |||
Want to eliminate govenor | Gas Club Car |