48 volt TXT 2011 does nothing, no solenoid click

scottyb · 09-26-2016, 02:47 PM

Good to hear it. We must have suffered a miscommunication or errant reading to have missed such an early stage check.
We still stand by what we said, see you back here soon

millersouth · 03-24-2017, 10:02 PM

What wire was jumped. The blue one that is coming out of charger port or the orange Wire that goes to the controller?

Sent from my SM-G925T using Tapatalk

Bray6092 · 05-08-2017, 10:12 PM

Can someone explain this process my cart is doing this exact thing

slimjim1425 · 03-29-2020, 01:41 PM

Do you put your meter on dcv 10 or 250 or 500 to read the 48 volts or do you put it on acv 10 or 250 or 500

kgsc · 03-29-2020, 02:12 PM

DCV 250. DC voltage range 0-250

Redrum323 · 08-03-2020, 02:33 PM

Quote:

Originally Posted by rabbitreborn

Use a back pin probe on pi 6 of the controller (use the red probe of your DVM). Put the black probe of your DVM on the main battery pack negative. Key on, Cart in gear (F or R) press the accelerator. Do you see full pack voltage on Pin 6 of the controller? That is where the signal comes from to swap Pin 12 over to a ground and activate the solenoid. If Pin 6 isn't getting the pack voltage, then the controller won't activate the ground. If Pin 6 is getting the full pack voltage signal, then the controller has failed internally and will need to be replaced.

What does “the controller won’t activate the ground “ mean? What would be the next step?

09-26-2016, 02:47 PM	#21
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,399	Re: 48 volt TXT 2011 does nothing, no solenoid click Good to hear it. We must have suffered a miscommunication or errant reading to have missed such an early stage check. We still stand by what we said, see you back here soon

03-24-2017, 10:02 PM	#22
millersouth Gone Wild Join Date: Feb 2015 Location: Myrtle Beach S.C Posts: 151	Re: 48 volt TXT 2011 does nothing, no solenoid click What wire was jumped. The blue one that is coming out of charger port or the orange Wire that goes to the controller? Sent from my SM-G925T using Tapatalk

05-08-2017, 10:12 PM	#23
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461	Re: 48 volt TXT 2011 does nothing, no solenoid click Can someone explain this process my cart is doing this exact thing
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461

03-29-2020, 01:41 PM	#24
slimjim1425 Not Yet Wild Join Date: Mar 2020 Posts: 7	Re: 48 volt TXT 2011 does nothing, no solenoid click Do you put your meter on dcv 10 or 250 or 500 to read the 48 volts or do you put it on acv 10 or 250 or 500
slimjim1425 Not Yet Wild Join Date: Mar 2020 Posts: 7

03-29-2020, 02:12 PM	#25
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,120	Re: 48 volt TXT 2011 does nothing, no solenoid click DCV 250. DC voltage range 0-250

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
98 club car 48 volt won't move no click at solenoid	Electric Club Car
Solenoid won't click	Electric EZGO
No Solenoid click	Electric EZGO
03 48v cc solenoid will not click	Electric Club Car
New solenoid/ No click	Electric EZGO