|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-18-2020, 09:59 AM | #1 |
Getting Wild
Join Date: Sep 2020
Location: TN
Posts: 127
|
Have to replace Anderson SB50 Connector
I have to replace my charging connector.
It is for my 1995 Ezgo medalist. (stock unmodified) I have been using the search function here on the forum. And found several idea's and a-lot of good info. With that being said: The plug on my charger was black. The plug on my cart was light gray. Is the link below a good source for this plug? They sell them in sets which is what I need. Link: https://www.ebay.com/itm/Anderson-SB...97.m4902.l9144 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-18-2020, 10:20 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: Have to replace Anderson SB50 Connector
Are the cases bad or contacts or wiring? Stay with grey and black and you will be good there.
|
09-18-2020, 10:21 AM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Have to replace Anderson SB50 Connector
While I am not familiar with the EzGo receptacle itself, I can confirm the SB50 "black" connector is an exception to the "same color only matting" as the SB50 black housing also mates with the SB50 gray housing.
So either color connector works, but as far as pricing I usually apply the filters to display "free shipping only" & "US only" when I shop ebay, if you do that there are other less expensive sources for genuine Anderson SB50 connectors. |
09-18-2020, 12:09 PM | #4 | |
Getting Wild
Join Date: Sep 2020
Location: TN
Posts: 127
|
Re: Have to replace Anderson SB50 Connector
Quote:
Up till yesterday I would wiggle it till it made a good connection. Well I did not get it connected good. It distorted the plastic a little more than it all-ready was. Thanks for the info that's what I will go with It did have stainless steel flat spring clips in it. I don't think they where holding enough pressure to keep them connected good. |
|
09-18-2020, 12:12 PM | #5 | |
Getting Wild
Join Date: Sep 2020
Location: TN
Posts: 127
|
Re: Have to replace Anderson SB50 Connector
Quote:
The set with 8 gage black is only $11 or $12 or so. That what I will go with. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Pre 1995 Sb50 Connector on Charger | Electric EZGO | |||
EZGO sb50 charge connector | Electric EZGO | |||
SB50 Charge connector | Electric EZGO | |||
1986 36v club car won't run after I changed the crows foot plug to Anderson sb50 | Electric Club Car | |||
Need Help with anderson connector Please respond. | Electric EZGO |