|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-13-2021, 06:34 PM | #11 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: 98 EZGO series cart motor turns but doesn’t move
Battery bank voltage 38.1 wheels on ground pedal fully depressed voltage 37.5. Cart tries to move but doesn’t hardly move at all. On slight incline of driveway
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-13-2021, 06:34 PM | #12 |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 98 EZGO series cart motor turns but doesn’t move
Possibly a stuck armature brush in the motor.
|
06-13-2021, 06:36 PM | #13 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: 98 EZGO series cart motor turns but doesn’t move
Battery bank voltage 38.1 wheels on ground pedal fully depressed voltage drops to 37.5.
Cart tries to move but barely does , on slight incline on driveway |
06-13-2021, 06:39 PM | #14 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 98 EZGO series cart motor turns but doesn’t move
Quote:
-------------- If the voltage between controller's M- and B+ terminals, goes up to near pack voltage with pedal on floor, than it is a motor issue (brushes - cables). If the voltage only goes up to a few volt, it is a throttle or controller issue. |
|
06-13-2021, 06:42 PM | #15 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: 98 EZGO series cart motor turns but doesn’t move
Sorry I posted it twice didn’t realize the post had gone to a second page
|
06-13-2021, 06:49 PM | #16 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: 98 EZGO series cart motor turns but doesn’t move
Voltage between m- and b+ is 37.1 volts so close to pack voltage. So assuming I have a motor problem, brushes or commutator. The terminals on the motor were getting hot, 77 to 87 instantly
|
06-13-2021, 07:11 PM | #17 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 98 EZGO series cart motor turns but doesn’t move
Sounds like you've narrowed it down to the motor.
|
06-14-2021, 09:11 AM | #18 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: 98 EZGO series cart motor turns but doesn’t move
Thank you both for your help, will report back
|
06-14-2021, 09:29 AM | #19 |
Gone Wild
Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 98 EZGO series cart motor turns but doesn’t move
Image deleted ...
|
06-28-2021, 07:39 PM | #20 |
Not Yet Wild
Join Date: Jun 2020
Posts: 17
|
Re: 98 EZGO series cart motor turns but doesn’t move
We figured out the cart had the wrong motor in it thanks to another post on here and answers by JohnnieB. It had a shunt wound motor instead of a series one. Took me some time to find a used one but just put it on and the cart runs great. Thanks again for everyone’s help especially JohnnieB
|
Tags |
ezgo, its problem, series |
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 EZGO TXT motor turns but cart won't move | Electric EZGO | |||
EZGO Marathon - Turns over but doesn't start! (another one!) | Gas EZGO | |||
09 EZGO TXT PDS Beast 48 - Cart occasionally doesn't move when pushing pedal | Electric EZGO | |||
48V Club Car motor turns but won't move in reverse | Electric Club Car | |||
EZGO Turns Over but doesn't Go | Gas EZGO |