Gas 2000 EzGo wont do anything

[tomrain]

Thanks for all the replies guys! i finally got it figured out. The red wire feeding the microswitch was corroded into inside what appeared to be a good part of the wire. The mysterious green wire with the spade conncector...I found green wire coming from the microswitch, and the green wire in question was common with the wire going to the key switch. I never did find a female spade conncector, but since it was common to those, just tied it into the green wire coming from the microswitch. Back to running again! I took the schematic and just basically went thru one wire at a time until I found where I was losing my voltage..Thanks again guys for the help!!