|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-20-2013, 12:43 PM | #21 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,186
|
Re: "new" 2008 EZgo ST 2+2
Split ring clip and a wiring harness plug. It is easier if you take off the rear wheel but not required. Easy peasy
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-20-2013, 03:10 PM | #22 | |
Not Yet Wild
Join Date: Apr 2009
Location: Minneapolis Minnesota
Posts: 22
|
Re: "new" 2008 EZgo ST 2+2
Quote:
(goes off to look for drawings) |
|
05-20-2013, 03:26 PM | #23 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,186
|
Re: "new" 2008 EZgo ST 2+2
The magnet is attached to the end of the motor shaft. The sensor just sits there held in by a clip. If you remove the sensor, the cart will go into limp mode. If you change to an after market controller, you won't need that sensor anymore except to plug the hole in the end of the motor.
|
05-20-2013, 05:26 PM | #24 | |
Not Yet Wild
Join Date: Apr 2009
Location: Minneapolis Minnesota
Posts: 22
|
Re: "new" 2008 EZgo ST 2+2
Quote:
(I should add that only $780 was batteries, the rest was the personality chip, labor and taillights to bring it up to campground requirements) |
|
05-20-2013, 05:35 PM | #25 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,186
|
Re: "new" 2008 EZgo ST 2+2
She wouldn't like me.. Last count I have 6 carts..
|
05-21-2013, 08:17 AM | #26 |
Not Yet Wild
Join Date: Apr 2009
Location: Minneapolis Minnesota
Posts: 22
|
Re: "new" 2008 EZgo ST 2+2
Thanks for everyone's help, will see if I can fix it this weekend.
|
05-27-2013, 08:13 PM | #27 |
Not Yet Wild
Join Date: Apr 2009
Location: Minneapolis Minnesota
Posts: 22
|
Re: "new" 2008 EZgo ST 2+2
Cart fixed. Still isn't quite as fast as she'd like, but it'll do 19 mph which is more than enough for our 10 mph campground.
Indeed, the fix *was* the speed sensor, wish the guy would have just replaced it. Oh well, it was pretty easy to get the cart up on jacks and remove the wheel. All the zip tying - not so much :) Thanks all. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO | |||
2008 EZGO RXV Jakes 6" Spindle lift installation Photos | Electric EZGO | |||
What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back | Lifted Golf Carts | |||
2008 TXT with PDS draws current with controller in ".tow" | Electric EZGO | |||
2008 Club Car or PDS for lifting with 23" tires and 14" wheels | Lifted Golf Carts |