head gasket help

matluv1 · 01-07-2009, 04:27 PM

I recieved my head gasket today. does anyone know what to torque the bolts to?

spled77 · 01-07-2009, 08:29 PM

What year And size of motor ? If 295 OR 350 it is 16.6 -- 19.5

matluv1 · 01-07-2009, 09:37 PM

thanks but it's a 86' robin 244cc i called a parts store they told me 20-21

matluv1 · 01-07-2009, 09:49 PM

well I put the cart back together and it won't start #@!*%!!! going to try a new plug tomarrow.. no spark

bigD52 · 01-08-2009, 09:15 PM

i just replaced piston and rings and jug on my brothers 244cc and was told torque was 20 to 26 i torqued at 25

crash12888 · 01-09-2009, 12:46 AM

Did you just do the top end or the whole motor?
If just the top end, unscrew the plug boot from the wire, cut off @1/2" of wire and screw it back on. check for grounded wire.
If you had the coil off, what did you set the air gap at? set .017 to .019

matluv1 · 01-10-2009, 11:56 PM

i just took the top end off. I replaced the plug and wire. I have spark off and on trying to find a short or loose wire>

01-07-2009, 04:27 PM	#1
matluv1 Not Yet Wild Join Date: Nov 2008 Location: Northeast Ohio Posts: 25	head gasket help I recieved my head gasket today. does anyone know what to torque the bolts to?

01-07-2009, 08:29 PM	#2
spled77 Not Yet Wild Join Date: Nov 2008 Location: South Western Pa. Posts: 15	Re: head gasket help What year And size of motor ? If 295 OR 350 it is 16.6 -- 19.5

01-07-2009, 09:37 PM	#3
matluv1 Not Yet Wild Join Date: Nov 2008 Location: Northeast Ohio Posts: 25	Re: head gasket help thanks but it's a 86' robin 244cc i called a parts store they told me 20-21

01-07-2009, 09:49 PM	#4
matluv1 Not Yet Wild Join Date: Nov 2008 Location: Northeast Ohio Posts: 25	Re: head gasket help well I put the cart back together and it won't start #@!*%!!! going to try a new plug tomarrow.. no spark

01-08-2009, 09:15 PM	#5
bigD52 Not Yet Wild Join Date: Oct 2008 Location: Mascoutah, Il Posts: 6	Re: head gasket help i just replaced piston and rings and jug on my brothers 244cc and was told torque was 20 to 26 i torqued at 25

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-09-2009, 12:46 AM	#6
crash12888 Gone Crazy Join Date: Jan 2007 Location: Chesterfield, Va Posts: 6,021	Re: head gasket help Did you just do the top end or the whole motor? If just the top end, unscrew the plug boot from the wire, cut off @1/2" of wire and screw it back on. check for grounded wire. If you had the coil off, what did you set the air gap at? set .017 to .019

01-10-2009, 11:56 PM	#7
matluv1 Not Yet Wild Join Date: Nov 2008 Location: Northeast Ohio Posts: 25	Re: head gasket help i just took the top end off. I replaced the plug and wire. I have spark off and on trying to find a short or loose wire>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
try a different head	Gas Yamaha
295cc Head	Golf Carts and Parts
Head Swap	Gas EZGO
What's involved in tranny gasket?	Gas Club Car
Head on 2 stroke	Gas EZGO