88 2pg 2 washers on crank

[prb]

I am replacing the crank in a 88 2pg and was wondering do the 2 washers on the crank go between the bearing and the crank?one on each side of crank web.when i split the case they both fell of before i could see where they came from.

[Sean5545]

They are both on the same side, let me go back in my pictures and I will let you know which side that is....if I remember it's the clutch side but give me a few minutes they definitely go between the bearing and the crank

[prb]

Thank you. It dosent say anything in the service manual that I could find.

[Sean5545]

I checked my pictures, and yes when I split my case there was 2 washers on the crank between the crank and the bearing on the clutch side. I can't with 100 percent certainty say this is how it came from the factory because I've only owned the cart for the past 2 years so I'm not sure who did what before me. I did put it back together this way and it's been fine ever since

[prb]

Thank you