|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-30-2016, 01:18 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2016
Posts: 1
|
Help rod bearings
I have a g2 and I am going to replace my rod bearings . On the parts list thete are 3 different part numbers. What is the difference and how do I know which one to order.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-30-2016, 01:34 AM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,450
|
Re: Help rod bearings
They are for different size bearings. The crank is supposed to have a paint mark on it to tell you which one to use. Find & read the g2/G9 service manual, it explains with more detail than I can. I have no proof of this, but I believe they made different size bearings to allow the use of a wider range of unfinished cranks that may require just a bit more machining, as the different size bearings were all used on the assembly line.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tappered Bearings/ roller bearings | Design Center | |||
| Greasing bearings front bearings/ Bearing Buddies? | Gas EZGO | |||
| hub bearings | Electric EZGO | |||
| ez go bearings | Electric EZGO | |||
| Bearings | Gas Columbia ParCar | |||
Linear Mode
