|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-24-2010, 03:46 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2010
Posts: 9
|
throttle problem,new controller,throttle works backwards
installed upgraded curtis controller.throttle goes fast when first touched,slower when pushed down. help would be greatly appreciated, Thanx, John
Last edited by footer10; 04-24-2010 at 07:24 PM.. Reason: cancel post |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-24-2010, 04:23 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,939
|
Re: throttle problem,new controller,throttle works backwards
You have the wrong controller for your cart. the throttle input is programmed reverse from what you have..... what cart do you have? What controller do you have?
|
|
|
|
|
04-24-2010, 05:08 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2010
Posts: 9
|
Re: throttle problem,new controller,throttle works backwards
they sent wrong contoller but said it would work
|
|
|
|
|
04-24-2010, 05:10 PM
|
#4 | |
|
Not Yet Wild
Join Date: Apr 2010
Posts: 9
|
Re: throttle problem,new controller,throttle works backwards
Quote:
|
|
|
|
|
|
04-24-2010, 05:34 PM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2010
Posts: 9
|
Re: throttle problem,new controller,throttle works backwards
sorry I didn'tget back to you fast enough. Thanx, John still need help as of now
|
|
|
|
|
04-24-2010, 08:00 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,939
|
Re: throttle problem,new controller,throttle works backwards
okay, so here is the problem... your ezgo cart has a throttle input signal of 5K-0 ohms that it sends to the controller as you press the peddle. This is how the controller knows what position the gas peddle is in and how much amperage to release to the motor.....
Club car used 0-5k ohms for the same process. You guessed it  you got the wrong controller with a 0-5K ohm input  Hope you can get the right one easy enough  |
|
|
|
|
04-24-2010, 10:39 PM
|
#7 | |
|
Gone Wild
Join Date: Nov 2008
Location: MI, West Coast
Posts: 235
|
Re: throttle problem,new controller,throttle works backwards
Quote:
|
|
|
|
|
|
04-25-2010, 05:17 PM
|
#8 | |
|
Not Yet Wild
Join Date: Apr 2010
Posts: 9
|
Re: throttle problem,new controller,throttle works backwards
Quote:
|
|
|
|
|
|
04-25-2010, 07:31 PM
|
#9 |
|
Gone Wild
Join Date: Nov 2008
Location: MI, West Coast
Posts: 235
|
Re: throttle problem,new controller,throttle works backwards
I think the easiest thing to do is to pull the spade clips off the controller and check the resistance as you press down on the accelerator pedal. For your cart you should see a gradual change from 0 ohm to 5000 ohm as the pedal is depressed. I would check this before doing anything else.
|
|
|
|
|
04-25-2010, 07:36 PM
|
#10 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,939
|
Re: throttle problem,new controller,throttle works backwards
Quote:
 YUP My bad, Ezgo = 0-5k Club Car 5k-0 |
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 94 Club Car Gas Throttle Problem | Gas Club Car | |||
| g22e throttle problem | Electric Yamaha | |||
| Throttle problem | Electric Club Car | |||
| Throttle Problem | Gas Club Car | |||
| Throttle problem? | Electric Club Car | |||
Linear Mode
