|
|
|||||||
| Lifted Golf Carts Off-Road Golf Carts. |
  |
|
|
Thread Tools | Display Modes |
05-01-2010, 05:46 AM
|
#1 |
|
Gone Wild
Join Date: Aug 2007
Location: Central NJ
Posts: 248
|
Help with washers on Jakes LT for CC
I can't get Ken on the phone at Jakes - he must be in big demand. The Long Travel kit for CC has 4, 7/16 washers that have a raised center portion. It's a spacer for something I just can't figure out for what. I was thinking for the king pin bolt that holds the spindles - Any ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-01-2010, 09:29 AM
|
#2 |
|
Member 23082
 Join Date: Mar 2010
Location: Spokane Washington
Posts: 1,169
|
Re: Help with washers on Jakes LT for CC
I couldnt figure it out either, I thought it was to be used between spindle and king pin. This would reduce friction between the two when tightened?
|
|
|
|
|
05-01-2010, 09:55 AM
|
#3 |
|
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Help with washers on Jakes LT for CC
Are they heim spacers??
|
|
|
|
|
05-01-2010, 11:36 AM
|
#4 |
|
Gone Wild
Join Date: Aug 2007
Location: Central NJ
Posts: 248
|
Re: Help with washers on Jakes LT for CC
Here is a picture:
Image00001.jpg |
|
|
|
|
05-01-2010, 12:17 PM
|
#5 |
|
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Help with washers on Jakes LT for CC
Yep, those are heim spacers. I think you should have eight, I believe they should space the upper and lower A-arms from the new spindles.
|
|
|
|
|
05-01-2010, 03:48 PM
|
#6 |
|
Gone Wild
Join Date: Aug 2007
Location: Central NJ
Posts: 248
|
Re: Help with washers on Jakes LT for CC
I only have 4 - if they are just for the spindle heims then that's all I would need, right? (each side needs 2)
|
|
|
|
|
05-02-2010, 06:53 AM
|
#7 |
|
Gone Wild
Join Date: Mar 2010
Location: Hampton, VA
Posts: 503
|
Re: Help with washers on Jakes LT for CC
Yep! one on top, one on bottom, repeat for other side=4!
|
|
|
|
|
05-02-2010, 07:01 AM
|
#8 |
|
Gone Wild
Join Date: Aug 2007
Location: Central NJ
Posts: 248
|
Re: Help with washers on Jakes LT for CC
Thanks! Flat side to the spindle or to the heim?
|
|
|
|
|
05-02-2010, 07:44 AM
|
#9 |
|
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Help with washers on Jakes LT for CC
Guess you need to get with Jakes. I was thinking you need to double them for each side, flats in the middle, hence the need for eight. Do the instructions give you any clue as to the number in the kit?
|
|
|
|
|
05-02-2010, 02:20 PM
|
#10 |
|
Gone Wild
Join Date: Aug 2007
Location: Central NJ
Posts: 248
|
Re: Help with washers on Jakes LT for CC
Nothing in the instructions. I'll need to contact them on Monday.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Differential Shim Washers? | Electric Club Car | |||
| jakes and 20,s | Electric Club Car | |||
| Jakes lift kit let me down! | Lifted Golf Carts | |||
| Lock Washers on Battery Post | Electric golf carts | |||
| g1 jakes lift kit | Gas Yamaha | |||
Linear Mode
