Big rear lift and 2" front w/ tires and wheels.

[SCRAP]

Here are a few pictures. I built my rear lift and had to relocate the front of the engine cradle underneath the chassis and build a new drop mount, and added 2" to the front end.

I don't like the big rear to front rake look. Everything I've done, I've built, so all I have in the lift is my time and sweat. I'm working on a dual-a-arm w/coilover shocks, front end as well. The wheels are Douglas .160 aluminum with Dunlop 22x10-10's on the rear, fronts are the same wheels with the half worn-out, Dunlop take-offs from the front of my 450r 22x7-10. Thought I'd share.

-SS

[XRT]

The Rake looks good!!

[BLACK DEATH]

Looks good,

[SCRAP]

Thanks, it's still a work in progress, too many projects and not enough time and $$$! BlackDeath, what does your schedule look like next week?

-SS

[BLACK DEATH]

Well, im off sat-mondays now and I work from 730-6pm tue-fri... Id like to check out that lift and bs too

[papaw]

I like the look! I wanted to do that to mine CC and put 10" rims front 12" on the back, but being new i asked about that look and to many relys came back not to do that. but i also wanted to widen the rear tires with spacers. But i like the look you have there. 3

[SCRAP]

I didn't use any spacers, just used 10" wide 10's with a good tire and it widened it up a good bit. I'm not sure why anyone woould say don't do it, I have NO clearance problems lock to lock in the front.

I don't really dig the rake look a lot, but some people do. When I finally get the front finished I'm hoping that it'll be about a 1/2 an inch taller in the front and within a 1/2" of width. Thanks, I hope to get a few more things done to it within the near future!

-SS

[BLACK DEATH]

Hey where did you go muddin at?

[SCRAP]

A trail heading toward the Nueces river.

-SS

[BLACK DEATH]

I need to get some tires for mine so I can head that way when you all go