Clutch rollers for 97 g16, plastic or steel ?

bigstik40 · 12-08-2010, 02:40 PM

Hello to all:
I am getting ready to replace the primary clutch rollers in my 97 G-16 and was looking for advice as to what type to buy. I have found some rollers that look like they might be molded plastic, with collars, (similar in shape to the originals). I have also found some steel rollers, without the collars. (these do not look like the originals but are listed as the proper replacements). The plastic rollers are lower in cost by about $8-$9 per roller. I am looking for recommendations as to which type roller would be the best replacement. Thanks in advance for any advice on this. Ray in Erie,PA -

Dave in VA · 12-08-2010, 05:48 PM

I think that you get what you pay for... Mine were replaced with steel and the shop charged me about $30 per roller. (the originals were steel) I don't think that would have picked the plastic ones if I was given the choice.

smallblock450sl · 12-08-2010, 06:59 PM

I agree with Dave...Go steel. I didn't even know they made those cheap plastic ones anymore.

jadawg27 · 12-08-2010, 09:53 PM

I also went with the steel ones. the way I look at it is if the steel ones wear out the plastic ones will a lot faster.

bigstik40 · 12-13-2010, 03:15 PM

Thanks to all who replied. I am going to go with the steel rollers as I also believe they will be the best choice, even though I will not be putting that many miles on the cart. RAY

12-08-2010, 02:40 PM	#1
bigstik40 Gone Wild Join Date: Sep 2010 Location: Erie, Pennsylvania Posts: 989	Clutch rollers for 97 g16, plastic or steel ? Hello to all: I am getting ready to replace the primary clutch rollers in my 97 G-16 and was looking for advice as to what type to buy. I have found some rollers that look like they might be molded plastic, with collars, (similar in shape to the originals). I have also found some steel rollers, without the collars. (these do not look like the originals but are listed as the proper replacements). The plastic rollers are lower in cost by about $8-$9 per roller. I am looking for recommendations as to which type roller would be the best replacement. Thanks in advance for any advice on this. Ray in Erie,PA -

12-08-2010, 05:48 PM	#2
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,345	Re: Clutch rollers for 97 g16, plastic or steel ? I think that you get what you pay for... Mine were replaced with steel and the shop charged me about $30 per roller. (the originals were steel) I don't think that would have picked the plastic ones if I was given the choice.

12-08-2010, 06:59 PM	#3
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,888	Re: Clutch rollers for 97 g16, plastic or steel ? I agree with Dave...Go steel. I didn't even know they made those cheap plastic ones anymore.

12-08-2010, 09:53 PM	#4
jadawg27 Gone Wild Join Date: Apr 2009 Location: peotone IL Posts: 320	Re: Clutch rollers for 97 g16, plastic or steel ? I also went with the steel ones. the way I look at it is if the steel ones wear out the plastic ones will a lot faster.

12-13-2010, 03:15 PM	#5
bigstik40 Gone Wild Join Date: Sep 2010 Location: Erie, Pennsylvania Posts: 989	Re: Clutch rollers for 97 g16, plastic or steel ? *Thanks to all who replied. I am going to go with the steel rollers as I also believe they will be the best choice, even though I will not be putting that many miles on the cart. RAY*

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Why steel instead of aluminum?	Electric EZGO
PRIMARY CLUTCH ROLLERS-OLD vs NEW	Gas Yamaha
steel wheels	Golf Carts and Parts
12" steel wheels	Lifted Golf Carts