|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-14-2011, 10:10 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Orange County, CA
Posts: 47
|
?? How To: Change the Drive Belt & Starter Belt
What is the best way to get the old belt off (without cutting it off) and to get the new one on? Should I just spin it and rotate it off with a screwdriver acting as a lever until it comes off or is there some sort of tensioner that I need to loosen? I know there is a tension bolt for the starter belt but not too sure on the drive belt. Thanks, Brendan
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-14-2011, 10:34 PM
|
#2 | |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,459
|
Re: ?? How To: Change the Drive Belt & Starter Belt
Quote:
Keep the old ones as spares in the cart. |
|
|
|
|
|
09-17-2012, 10:03 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2012
Posts: 2
|
Re: ?? How To: Change the Drive Belt & Starter Belt
Any ideas for the rxv
|
|
|
|
|
09-18-2012, 06:17 AM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Phoenix AZ
Posts: 61
|
Re: ?? How To: Change the Drive Belt & Starter Belt
Did mine (94 gas marathon) yesterday-key off, left in neutral, drive belt (which was old and stretched but totally functional) was a joke and walked right off- Starter belt did have tension rod and a couple nuts which had to loosen- still wasn't enough, so I cut the old belt off- new one went on in 30 seconds after that- why don't you want to cut it?
|
|
|
|
|
09-18-2012, 08:57 AM
|
#5 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,459
|
Re: ?? How To: Change the Drive Belt & Starter Belt
No mechanical reason but on the starter belt you will need to adjust it anyway and it is nice to have a spare when something snags it and it breaks out in the woods.. Been there.. I actually want to find one of those make a belt deals like they use on saws. Like rubber links that interlock and stretch. Would be a good backup to carry. May not be perfect but it would get you home
|
|
|
|
|
06-15-2014, 04:11 PM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2014
Location: North Carolina
Posts: 1
|
Re: ?? How To: Change the Drive Belt & Starter Belt
have a 2013 Gas EZGO TXT Starter Belt is Fraid How to take Off and Replace??
|
|
|
|
|
06-16-2014, 12:11 AM
|
#7 | |
|
Gone Wild
Join Date: Jul 2013
Location: Juliette GA
Posts: 271
|
Re: ?? How To: Change the Drive Belt & Starter Belt
You need to loosen the double nuts on the tensioning rod and the two nuts and bolts at the pivot point. Then you can remove the starter belt.
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| replacing alternator/starter belt with shorter belt | Gas Club Car | |||
| 92 carry all drive belt and starter belt | Gas Club Car | |||
| How do I change the drive belt and altenator belt? | Gas Club Car | |||
| Belt change | Gas EZGO | |||
| DS Belt change | Gas Club Car | |||
Linear Mode
