how to get my battery charging with s/g, regulator,and battery.

[doittoit]

Hi ,I got a Honda 8 HP engine in a cart.the cart has been striped.I have a pull start on the engine and thats how I've been starting it. I welded a bracket so i can use the s/g but i dont know were the green , red , and black wire connect from regulator.the s/g is correctly wired and I have a solenoid with two big post and two small post.how would I connect so my battery can charge.also could I use a car battery? Any help would be greatly appreciated.mahalo

[stretchman]

I am only familiar with two starter/gen. the old yamahas had a red and green wires coming out of it, but you would have figured that one out already. The ezgo's have one small bolt/lug that the green wire will go to. The red wire can go on the solenoid's big terminal to battery +, and the black wire to a good ground/frame/engine/battery. you should have a #6 cable for ground from battery to the frame and the frame to the engine/mount

[doittoit]

Originally Posted by stretchman

I am only familiar with two starter/gen. the old yamahas had a red and green wires coming out of it, but you would have figured that one out already. The ezgo's have one small bolt/lug that the green wire will go to. The red wire can go on the solenoid's big terminal to battery +, and the black wire to a good ground/frame/engine/battery. you should have a #6 cable for ground from battery to the frame and the frame to the engine/mount

This is what I have.where do I run the red and green wires From s/g and the wires from regulator .hope you can make out my drawing.thank you for helping me out.