02-02-2015, 06:20 PM | #11 |
Gone Wild
Join Date: Aug 2011
Posts: 553
|
Re: Help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-02-2015, 09:15 PM | #12 |
Not Yet Wild
Join Date: Jan 2015
Posts: 48
|
Re: Help
I have ordered a code 5 programmer for a completely stock cart ill post on how well it works.
|
02-02-2015, 09:27 PM | #13 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Help
|
02-03-2015, 07:07 AM | #14 |
Getting Wild
Join Date: Oct 2012
Posts: 116
|
Re: Help
Not exactly. Even at Private Speed Mode 4, Club Car only allows that 250 amp controller to put out 110 amps. The firmware remains, but the settings are bypassed to allow more amperage.
|
02-03-2015, 09:53 AM | #15 |
Getting Wild
Join Date: Oct 2012
Posts: 116
|
Re: Help
Did you order from us? Just wondering since I didn't see an order come through. We have an excellent relationship with the manufacturer, so either way is cool with us. I just wanted to make sure that we weren't having website issues.
|
02-03-2015, 09:05 PM | #16 |
Gone Wild
Join Date: Aug 2011
Posts: 553
|
Re: Help
So the speed code 5 has the potential to produce almost 2.5 times the torque over stock settings and speed up the cart also ??
|
02-03-2015, 10:06 PM | #17 |
Not Yet Wild
Join Date: Jan 2015
Posts: 48
|
Re: Help
No but I wish I did I didn't see your reply till after I bought it direct but if I need anything else I will use you for sure. Thanks
|
02-05-2015, 11:20 AM | #18 |
Getting Wild
Join Date: Oct 2012
Posts: 116
|
Re: Help
Again, that is sorta the case. The other limiting factor is what the motor will actually draw. The Speed Code 5 will give you the potential to use up to 250amps, depending on the motor's draw.
|
02-07-2015, 04:14 PM | #19 |
Not Yet Wild
Join Date: Jan 2015
Posts: 48
|
Re: Help
New problem. So does anyone know how to fix this problem I believe its called a MCOR issue. This cart was taken off a golf course and I tested the pin adapter that goes into the Curtis controller and I only am getting 3/4 use out of the pedal 3.8 to 3.9 ohms. So its not letting me get to my top speed. How do I correct this problem. Thanks All
|
02-07-2015, 06:05 PM | #20 | |
Guest
Posts: n/a
|
Re: Help
Quote:
good info here http://www.buggiesgonewild.com/elect...ml#post1064004 |
|