07-01-2019, 01:40 PM | #1 |
Not Yet Wild
Join Date: May 2019
Posts: 2
|
2011 tomberline vanish brakes grabbing and realising
we bought a 2011 timberline vanish was told it neded a back brake caliper that was causing the brakes to grab we have replaced did not fix we removed both back calipers machine still locks up lots noise coming from transfewr case ideas
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-18-2019, 10:12 AM | #2 |
Getting Wild
Join Date: Jun 2018
Posts: 83
|
Re: 2011 tomberline vanish brakes grabbing and realising
late post but might help someone else,, had same prob, on an emerge changed fluid out and bled with DOT 5 synthetic all the number means is a higher heat range anyhow it fixed mine
|
08-23-2019, 11:15 AM | #3 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 2011 tomberline vanish brakes grabbing and realising
Quote:
BRAKE FLUID FACTS Never use DOT 5 fluid in a vehicle that uses DOT 3 or DOT 4 You can use DOT 4 in a car that uses DOT 3, but NOT vice-versa Never substitute any other fluid for brake fluid Do not spill brake fluid - it damages painted surfaces and finishes Wash your hands after coming in contact with brake fluid DOT 5 doesn’t mix well with glycol fluids in cars with ABS brakes |
|
08-23-2019, 03:31 PM | #4 |
Getting Wild
Join Date: Jun 2018
Posts: 83
|
Re: 2011 tomberline vanish brakes grabbing and realising
read,, i said bleed it out,, DOT (Department of Transport) coding and are either DOT 3, DOT 4 or DOT 5.1. In general, the higher the number the higher the typical brake fluid boiling point.Jan 2, 2013,, simple terms HEAT nothing else
|
08-23-2019, 03:40 PM | #5 |
Getting Wild
Join Date: Jun 2018
Posts: 83
|
Re: 2011 tomberline vanish brakes grabbing and realising
hard to make clearer,, bleed out change whatever term you want to use,, then use computer and checkout what the numbers mean in brake fluid,, heat resistance,, boiling point,, again whatever term you want to use,, DOT (Department of Transport) coding and are either DOT 3, DOT 4 or DOT 5.1. In general, the higher the number the higher the typical brake fluid boiling point.Jan 2, 2013
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Ez go txt brakes grabbing /locking up. | Electric EZGO | |||
2003 Club Car DS - weak brakes - not grabbing | Electric Club Car | |||
Lifted 98 TXT brakes grabbing | Electric EZGO | |||
Grabbing brakes on 2009 Precedent | Electric Club Car | |||
Brakes Grabbing | Electric Club Car |