|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-24-2021, 01:58 PM | #1 |
Not Yet Wild
Join Date: Jan 2013
Location: Tallahassee, FL
Posts: 28
|
A little Alltrax help
I ordered my Alltrax SCT48500 from ScottyB while I was running a D&D motor and 36V pack. I changed the motor to the Admiral B2 and uploaded the new Field Map. When I went to a 48V pack I got a blink message of low voltage. I can't remember what the low and high max voltages were but I guessed the low would need to be higher and the high would need to be higher as well. (I think the low was around 30 and the high set at 44 or something when I was at 36V.)
Anyway, I input about 6V lower and about 6-8 higher than 48 and the cart runs great. But I would like to know where these settings are supposed to be. So, does anyone know what the Low and High voltage settings should be for this controller running the Admiral B2? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-24-2021, 02:00 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: A little Alltrax help
For 48v operation set the low to 38v and the high to 60v. Set the maximum armature amps to 450. And be sure the B2 is loaded.
|
01-25-2021, 09:22 AM | #3 |
Not Yet Wild
Join Date: Jan 2013
Location: Tallahassee, FL
Posts: 28
|
Re: A little Alltrax help
Excellent! Will do. And thanks again! This thing will lay rubber and barely slows on hills now. Could not be happier with the performance.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax help | Electric Club Car | |||
Swapping Alltrax AXE 7245 450a for Alltrax SR 72500 500a | Electric EZGO | |||
Alltrax going bad??? | Electric Club Car | |||
Alltrax axe | Electric EZGO | |||
alltrax | Extreme DC! |