|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-21-2010, 07:54 PM | #1 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
mesh cargo box for G16
im looking at a mesh cargo box for my 97 G16 is it worth 220.00 or would it be way cheaper making my own ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2010, 08:30 PM | #2 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: mesh cargo box for G16
I would think you could make your own for a quarter of that price......
|
09-21-2010, 09:17 PM | #3 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: mesh cargo box for G16
Depends on what you value your time at?
If it takes you 4 hours to make and you are self employed or do side jobs, could you go out and make more than $220.00 in the same 4 hours? |
09-21-2010, 09:20 PM | #4 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: mesh cargo box for G16
i think i might go ahead and make my own my only problem might be is trying to bend the tubing/square tubing
|
09-21-2010, 09:21 PM | #5 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: mesh cargo box for G16
|
09-21-2010, 09:29 PM | #6 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: mesh cargo box for G16
sounds good in my book, im going to head to the scrap yard tomorrow and find some necessary tools to build it
hard part is bending the square tubing i think |
09-21-2010, 10:03 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: mesh cargo box for G16
Okay ......stop. You can not bend square tubing with out a very expensive bender and square tube dies...... If you have to acquire tools for a project like this you are probably not going to like how it turns out and it will cost thousands of dollars
GO buy it IMHO..... wait. Does that cart run yet? JUst kidding nitro, Just start another thread and build it... |
09-21-2010, 10:18 PM | #8 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: mesh cargo box for G16
almost just waiting on a few small parts, like the shaft for my clutch to fit on my vanguard shaft, and the coils ....so while im waiting on it i decided to move on till it comes in :)
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Cargo box w/pictures | Lifted Golf Carts | |||
Cargo boxes | Design Center | |||
cargo box options | Design Center |