My G2 dosent like rocks

[Recoil]

just got the new bolt, going to try and get over to the shop tomorrow but if i can't go monday is the next time i have a chance to work on it = )

[Recoil]

put the new bolt on and put everything back together and it runs great! who would have thought hitting a **** rock would cause this type of issue heh

[Mike Mac]

Good deal Coil!!

[Recoil]

I think what happen was if you push the clutch peice right to the engine block and try to screw the bolt down it gets stuck (tweked maybe) and the people before me just jamed it down and twisted the threads. Personaly when i noticed this i stoped right away and puulled it all apart agean to triple check it was ok and then found if you hold the kit away and do it by hand till its snug and then used a inpact drill to do the final few turns its much safer

not sure why mine is like this but /shrug

[kcnaz]

Originally Posted by Recoil

So i pulled the engine out and was about to bust the bad buy open when i found what the problem was



someone who owned the cart before me thought it was a good idea to take the drive shaft bolt out and replace it with the wrong bolt and striped it out so the clutch and flywheel were spinning free with out moving the drive shaft it self, the bolt and the shaft threads look striped so i ordered the correct bolt and will see just how bad the threads are on the shaft when i get it in

could be a $10 fix (i hope) but if the threads on the shaft are to far gone it could end up costing me ******* $250 for a new shaft if its to far gone to re-thread

lets hope its the easy side lol

and now some new pics of some work i did tonight since i could do now more on the engine for the moment

Any pics of the swan finished up???

[Recoil]

once its fineshed, thats what it looks like currently and i still have a lot to do