91 EZGO TXT Rewiring sizes

[tdanrick]

I am trying to rewire my 91 EZGO Textron cart. Is there a wiring diagram handy that specifies the small wire sizes for the key switch and F/R? Just want to make sure I use the correct sizes!

[Gonkulor]

T

First let know exactly what you have. Find your model number off your data tag. and have a look at this link. http://www.ddmotorsystems.com/seriesVSregen.htm

I know there is a page somewhere you can just put your numbers into but I can't find it for the life of me. Some one will chime in.

After you know more specifics you only need to spend a couple minutes hunting around these links to download your manual. http://www.buggiesgonewild.com/elect...g-manuals.html

Also, since your trying to rewire control circuits that don't take a load you should be fine with ? maybe 18 ga wire. The heavier the better but there is a point your doing nothing but adding weight when adding wires for control circuits.

Hope that helps a little