|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-18-2013, 08:19 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Posts: 17
|
New Ignition Switch
Just Got my first cart 08 Ez-go txt. I was thinking about getting a new ignition switch that is uniquely keyed. My cart has a push pull light switch with 2 prongs and I was thinking about tying that in with my ignition switch. Any thoughts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-18-2013, 08:51 PM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: New Ignition Switch
I bought a uniquely keyed, three position switch. They ain't cheap. Has four prongs, so shouldn't be a problem. You can plug the wires in to be off, on, on with lights.
|
08-18-2013, 09:04 PM | #3 |
Not Yet Wild
Join Date: Aug 2013
Posts: 17
|
Re: New Ignition Switch
So did you just plug the 2 wires from your ignition in and the 2 wires from your lights?
|
08-19-2013, 03:37 AM | #4 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: New Ignition Switch
Yep. They're two independent switches. If it doesn't come with a diagram, use Google or a meter to see which pair turns on in the third position, and that will be the lights. The other pair should be on for the second and third positions, and that's your original key switch pair.
If you buy a non-OEM key switch, be sure the two switches are independent. One is 36 (or 4 volts and the other is 12, and you don't want them crossed. EDIT: Mine didn't come with lights, but I use the third position to power up my 48 volt to 12 volt reducer, which powers all of my accessories. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Key ignition switch | Gas Club Car | |||
Ignition Switch G14 | Gas Yamaha | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
New Ignition Switch | Gas EZGO |