lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-24-2013, 07:18 PM   #1
deansies
Not Yet Wild
 
Join Date: Sep 2012
Posts: 12
Default 420cc clone motor question

im trying to make a bracket the generator on my clone swap. i need to know wat bolt size or thread pitch the holes on the clutch side of the motor are. they are the holes closest to the crankshaft on the crankcase cover. i tried a bolt from another part of the motor but its not quit the right thread. any info would b great. thx!
deansies is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
1991 Club Car DS 420cc Clone Motor Gas Club Car
Predator 420cc coil question Clone Engine Swaps
HF 420cc clone engine question thread Clone Engine Swaps
Harbor Freight not selling 420cc clone? Clone Engine Swaps
420CC clone throttle linkage Big Block Talk!


All times are GMT -5. The time now is 07:57 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.