2009 ezgo TXT PDS Spun Hub

superuo · 11-04-2013, 05:16 PM

I have what I saw in another thread described by Scottyb as a "spun Hub". Cart will not go in forward or reverse. Loud whirring noise. Pulled off tire and wheel, braced wheel lugs and pressed accelerator. the slotted nut at the end of the axle just spins.

What exactly should I replace? Do I need to do it on both sides?

Thanks.

scottyb · 11-04-2013, 05:41 PM

One side will fix it today..... the other side will be weaker and eventually probably go the same way. So why not do them both now? You get the hub and the drum pictured in the repair kit.

Sir Nuke · 11-04-2013, 06:40 PM

and do it right and buy a set of Pinch Hubs at CartsUnlimited.net

http://www.cartsunlimited.net/Ezgo_Pinch_Hubs.html

superuo · 11-04-2013, 07:08 PM

Thanks Scottyb. Will order two on payday. just to make sure, I have an ezgo but the description stated club car drum. Is that compatible with the ezgo.

kellybell · 11-04-2013, 07:36 PM

Either you have a stripped out hub, or a stripped out hub and a stripped out axle shaft. To make matters worse, you have it either on one side or both. Pull off the wheel and hub from one side and take a look at the inside of the brake hub. You will probably find it is stripped, and does not have splines on it. If in doubt, post some pics. Then take a look at the shaft you just pulled it from. It may be OK, but it may not be. If it is stripped, then you need the hub and the shaft. Repeat for the other side......

Sir Nuke · 11-04-2013, 07:59 PM

Quote:

Originally Posted by superuo

Thanks Scottyb. Will order two on payday. just to make sure, I have an ezgo but the description stated club car drum. Is that compatible with the ezgo.

the hubs you have on your cart now are a single piece, the Pinch Hubs are TWO PIECE......they are comprised of the EzGo hub, and the CC drum, and yes they are compatible.

11-04-2013, 05:16 PM	#1
superuo Not Yet Wild Join Date: Aug 2013 Posts: 37	2009 ezgo TXT PDS Spun Hub I have what I saw in another thread described by Scottyb as a "spun Hub". Cart will not go in forward or reverse. Loud whirring noise. Pulled off tire and wheel, braced wheel lugs and pressed accelerator. the slotted nut at the end of the axle just spins. What exactly should I replace? Do I need to do it on both sides? Thanks.
superuo Not Yet Wild Join Date: Aug 2013 Posts: 37

11-04-2013, 06:40 PM	#3
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 18,001	Re: 2009 ezgo TXT PDS Spun Hub and do it right and buy a set of Pinch Hubs at CartsUnlimited.net http://www.cartsunlimited.net/Ezgo_Pinch_Hubs.html

11-04-2013, 07:08 PM	#4
superuo Not Yet Wild Join Date: Aug 2013 Posts: 37	Re: 2009 ezgo TXT PDS Spun Hub Thanks Scottyb. Will order two on payday. just to make sure, I have an ezgo but the description stated club car drum. Is that compatible with the ezgo.
superuo Not Yet Wild Join Date: Aug 2013 Posts: 37

11-04-2013, 07:36 PM	#5
kellybell So wild it hurts! Join Date: Nov 2011 Location: Atlanta, Georgia Posts: 1,412	Re: 2009 ezgo TXT PDS Spun Hub Either you have a stripped out hub, or a stripped out hub and a stripped out axle shaft. To make matters worse, you have it either on one side or both. Pull off the wheel and hub from one side and take a look at the inside of the brake hub. You will probably find it is stripped, and does not have splines on it. If in doubt, post some pics. Then take a look at the shaft you just pulled it from. It may be OK, but it may not be. If it is stripped, then you need the hub and the shaft. Repeat for the other side......

Similar Threads
Thread	Forum
i think i may have spun the bolts on my motor!!!!	Electric EZGO
2009 ezgo rxv	Electric EZGO
G2 no oil spun rod bearing	Gas Yamaha
Is Spun Hub a Common Problem?	Gas EZGO
2009 ezgo	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum