|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-08-2013, 10:28 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Location: True North, Canada
Posts: 27
|
Brand new DPI charger not working
Bought and received a 48v dpi charger and when I went to hook it up to my cart it just sits in detection mode, no wires are loose inside the unit and batteries are at 80%. Any ideas what I could try?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-09-2013, 08:26 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Brand new DPI charger not working
Plug your meter test leads into the cart charge receptacle and see what the charger is seeing when it's plugged in.
|
11-09-2013, 05:02 PM | #3 |
Not Yet Wild
Join Date: Aug 2013
Location: True North, Canada
Posts: 27
|
Re: Brand new DPI charger not working
Getting a reading of zero. Weird thing is my old charger worked through this same port, any idea why? I have the receptacle wired to positive end and neves give end of the battery loop. Did I do it wrong? Any info would be great
|
11-09-2013, 06:20 PM | #4 |
Not Yet Wild
Join Date: Aug 2013
Location: True North, Canada
Posts: 27
|
Re: Brand new DPI charger not working
From what I remember on my old solid state hookup, the red went to the main solenoid positive and the black to the motor a2. Do you think this would effect the charger reading?
|
11-09-2013, 08:00 PM | #5 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Brand new DPI charger not working
Quote:
Post a diagram of your cart wiring - negative charge lead should go to the main battery pack negative. You must read the pack voltage in the charge receptacle before you start doubting the new charger. |
|
11-09-2013, 08:20 PM | #6 |
Not Yet Wild
Join Date: Aug 2013
Location: True North, Canada
Posts: 27
|
Re: Brand new DPI charger not working
I have the negative coming from receptacle to negative side of battery pack, positive of receptacle going the positive side of battery pack.
|
11-10-2013, 09:05 AM | #7 |
Gone Wild
Join Date: Nov 2012
Location: Ontario , Canada
Posts: 609
|
Re: Brand new DPI charger not working
What is your pack voltage read with a DVM (if pack voltage is very low some chargers will not detect it )also the DPI charger will flash error codes , also the charger port could have dirty or corroded contacts they may need cleaned
Cheers! |
|
|
Similar Threads | ||||
Thread | Forum | |||
Older ez go brand charger question | Electric EZGO | |||
Yamaha Brand Charger for my G19 question | Electric Yamaha | |||
How to bypass an unusual brand of charger? | Electric Club Car | |||
Is my charger working? | Electric EZGO | |||
Charger Not Working | Electric Yamaha |