|
04-26-2010, 07:11 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2010
Location: Pittsburgh Pa.
Posts: 5
|
2001 Workhorse st-350
Finally got my cart back after lending it to a buddy for the last three years. He added 80 hours to the 430 already on it. Compression is 175, couldn't wait to test it, I thought it was low on power when I lent it to him. I loosened the valve lash and drilled the main carb jet a little bigger for more low end torque before I took it to him, I always thought it should pull a little better than stock. The plugs told me I was heading in the right direction.
Then I found this site. THANKS FOR ALL THE GREAT INFO!  Yesterday I did the stock muffler mod, I was considering buying a set of headers before I found this site, you gurus were right on about power and "emotional hrsepower, lol. Sure, runs a little better, I've been wanting to chop that little exhaust off since I got it. Sounds good, nice tone. If I wanted to be quiet on a jaunt through nature I'll walk, lol. Very good info Next up...clutch, belt, etc.  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-28-2010, 04:42 AM
|
#2 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: 2001 Workhorse st-350
Hey, when you get done fixing it up can I borrow it for a few years.
  |
|
|
|
|
04-28-2010, 07:55 AM
|
#3 | |
|
Gone Wild
 Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: 2001 Workhorse st-350
Quote:
|
|
|
|
|
|
04-28-2010, 06:27 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2010
Location: Pittsburgh Pa.
Posts: 5
|
Re: 2001 Workhorse st-350
No problem guys, I'll even deliver it. Forgot to elaborate on the lending deal. I got to use his wife for three years
 |
|
|
|
|
04-28-2010, 08:25 PM
|
#5 |
|
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: 2001 Workhorse st-350
I'm in on that, as long as you take the wife!!!
|
|
|
|
|
04-29-2010, 05:55 AM
|
#6 | |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: 2001 Workhorse st-350
Quote:
yeah, the kids too. |
|
|
|
|
|
04-29-2010, 06:20 AM
|
#7 |
|
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: 2001 Workhorse st-350
Ha, ha, ha!!!!
|
|
|
|
|
05-02-2010, 09:10 AM
|
#8 | |
|
Not Yet Wild
Join Date: Apr 2010
Location: Pittsburgh Pa.
Posts: 5
|
Re: 2001 Workhorse st-350
Quote:
Post a pic of her and let me see if it's worth it I added the 27077G02 belt, big difference. lost my nuetral for now, tight shifting, should get better as belt wears a little as you posted Ruredy. I have a 36 stamped on clutch (factory-no mods ever done) I'm gonna try the 28 stuff. Thanks again guys, great stuff, I'm havin' fun |
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2001 ez go workhorse performance | Gas EZGO | |||
| 2001 ez go workhorse | Electric EZGO | |||
| 1999 workhorse 1200 or 2006 workhorse 800, which one? | Gas EZGO | |||
| 2001 CC help!! | Electric Club Car | |||
Linear Mode
