|
05-02-2012, 10:42 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2011
Posts: 4
|
93 par car oil pump question
If the oil pump has been deemed non-functioning and oil intake line plugged. Is it alright to remove the oil pump from the timing plate cover. As well as the cable that connects to the carburetor. Is there any point to keeping all those parts if they are not in use.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-02-2012, 11:27 PM
|
#2 |
|
Gone Wild
Join Date: Aug 2007
Location: North Texas
Posts: 2,312
|
Re: 93 par car oil pump question
It is OK to remove the unused parts but any hole or cavity leading to inside engine should be covered by a permanent plate or cover. I have not done this on a par car but have on many other engines so just use common sense and don't leave anything open.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| fuel pump question | Gas EZGO | |||
| fuel pump question | Gas Club Car | |||
| muffler - oil pump connection question | Gas Yamaha | |||
| Question about fuel pump pulse line | Gas Yamaha | |||
| fuel pump - general question | Gas EZGO | |||
Linear Mode
