|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-13-2009, 06:04 AM | #21 |
Gone Wild
Join Date: Jun 2009
Location: Heluvabump,VT
Posts: 623
|
Re: My 2 week old G1 Rebuild PROJECT!
Won't turning the engine around make everything work backwards? Or does CC run the engine & trans in the opposite direction to begin with?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-13-2009, 09:51 AM | #22 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
im not sure about engine rotation on a cc but the axle does run with the clutch on the pass side in a club car. Either way i will have to probably run in reverse to go forward but im not too worried at least i get a reverse.
|
11-17-2009, 10:21 AM | #23 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
Almost ready to put back together. I have run my kohler on the floor and after cleaning out the fuel cutoff solenoid runs like a top. Bent my rear swing arm after my lengthing to get the engine mounted at a better angle and lower like the kits i have seen on here. Now i just need to mount the engine and start reassembly.
|
11-19-2009, 05:12 PM | #24 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
here is fixing the twist i ended up with after bending the swing arm now its nice and stright hope to have axle and front end together by tomorrow and hope to have engine mounted this weekend. wish me luck
|
11-23-2009, 12:58 PM | #25 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
Here is my progress over the weekend. Got the wheels mounted and installed. Mounted the rear axle and front suspension is almost done. Modifying the mount plate so the mounts align and will be putting in that in the next couple of days. Bought myself a shifter cable and lever from ebay then it got refunded because they lost it so now i dont have a cable yet.
|
11-23-2009, 04:28 PM | #26 |
Gone Wild
Join Date: Nov 2009
Location: Kentucky
Posts: 287
|
Re: My 2 week old G1 Rebuild PROJECT!
looks like good progress.
|
11-23-2009, 07:17 PM | #27 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: My 2 week old G1 Rebuild PROJECT!
Way cool, keep the pics coming!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-24-2009, 08:02 AM | #28 |
Gone Wild
Join Date: Apr 2008
Location: Wichita, KS
Posts: 1,530
|
Re: My 2 week old G1 Rebuild PROJECT!
Looking good
Keep em coming |
11-24-2009, 10:09 AM | #29 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: My 2 week old G1 Rebuild PROJECT!
Thanks i hope once i get it all together the next thing will be to remove the 2 cradle mounts that are yami factory and put in a heim joint. So i can get a little more flex in the rear without the body moving
|
12-01-2009, 02:24 PM | #30 |
Gone Wild
Join Date: Jul 2009
Location: Liberty Lake, WA.
Posts: 1,762
|
Re: My 2 week old G1 Rebuild PROJECT!
Bump for updates.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1989 Marathon Rebuild/Upgrade Project | Electric EZGO |