|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-14-2008, 04:21 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Posts: 9
|
Clutch bolt size 83 EZGO gas cart
Hi,
This is my first post to the forum. Yesterday we picked up an EZGO 1983 gas golf cart. It has a number of minor problems the first of which is the clutch bolt is missing and the clutch assembly is loose. What are the specifications for the bolt? It looks like it should be about 6 to 7 inches long and about 3/8 to 7/16 inch in diameter. Any help would be greatly appreciated! Thanks, Brad |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-16-2008, 02:29 PM | #2 |
Not Yet Wild
Join Date: May 2008
Location: California
Posts: 20
|
Re: Clutch bolt size 83 EZGO gas cart
here is a pic of the bolt from my 81 ezgo.. 5 1/2" inches long and it looks to be a 1/2" fine thread...
plus there is this funky washer on the outside... and here the dimensions for the homemade clutch puller... |
08-02-2008, 08:27 PM | #3 |
Not Yet Wild
Join Date: Jun 2008
Posts: 9
|
Re: Clutch bolt size 83 EZGO gas cart
Finally got the bolt. It turned out to be 7/16 x 20 - 5-1/2" long.
Now the problem I'm having is trying to tighten the bolt enough to keep it from backing out when going into forward (at least I think it was forward when it came out!). What torque should the bolt be torqued to and how do you keep the clutch from turning while tightening the bolt with the engine still in the cart? Thanks! Brad |
08-04-2008, 11:03 AM | #4 |
Gone Wild
Join Date: Nov 2007
Location: OKOBOJI, IA.
Posts: 247
|
Re: Clutch bolt size 83 EZGO gas cart
LOCK-TITE AND ALL YOU GOT!
i had the same problem, so i bought a bolt a 1/4" shorter. just to make sure i was'nt bottoming out Dew |
09-22-2011, 01:48 PM | #5 |
Not Yet Wild
Join Date: Sep 2010
Posts: 9
|
Re: Clutch bolt size 83 EZGO gas cart
I know this is an old thread. Just went through this though. Specs call for tightening the clutch bolt to 40-44 ft. lbs (54-60 Nm.) The original (factory) bolt is 6" long (7/16" x 20 x 6".) There also should be a lock washer between the bolt head and the pilot (flat) washer.
FYI. |
05-03-2014, 11:32 PM | #6 |
Getting Wild
Join Date: Apr 2011
Posts: 91
|
The large washer with the cuts or notches in it.... That's actually a part of the rear motor mount system that somebody has used as a washer
Sent from my iPhone using Tapatalk |
10-14-2014, 06:33 AM | #7 |
Getting Wild
Join Date: Jul 2011
Location: England.live in a small Hamlet(village) poulation28
Posts: 101
|
Re: Clutch bolt size 83 EZGO gas cart
You can get your clutch bolt from EAST COAST CARTS telephone number
877-340-3606 Cost is 5.56 dollars Part number is 00473G9 hope that helps.web address is east coast carts.com Rockinr |
12-09-2015, 04:54 PM | #8 |
Not Yet Wild
Join Date: Mar 2015
Location: Ne.
Posts: 20
|
Re: Clutch bolt size 83 EZGO gas cart
Is there a factory clutch puller out there some where I can get my hands on, and where at with part number?
|
12-09-2015, 05:08 PM | #9 | |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: Clutch bolt size 83 EZGO gas cart
Quote:
https://www.cartpartsplus.com/tune-u...1-1988-2-cycle |
|
01-27-2016, 07:55 PM | #10 | |
Gone Wild
Join Date: Jul 2015
Location: Metro Detroit
Posts: 449
|
Re: Clutch bolt size 83 EZGO gas cart
Quote:
Tom |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Clutch | Golf Carts and Parts | |||
Belt Size for a 28 degree clutch. | Gas EZGO | |||
sheared bolt in the drive clutch | Gas Club Car | |||
Wanted: 98 Club Car clutch bolt | Golf Carts and Parts | |||
Bolt Patterns!!! | Electric EZGO |