|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-28-2020, 03:09 PM | #21 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
I was just asking, I’m new to all this and just want to learn. I’m gonna hook it up since I already have it. What would be a good thing to tap into for the wire to run to pin 3?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-28-2020, 03:19 PM | #22 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
There is already a wire in pin 3 (red with yellow line) runs to the run/tow switch.... is that what I need? Or do I have to run my own?
|
10-28-2020, 03:23 PM | #23 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
One wire on pin#3 to tow/run switch is enough.
How about pin positions #9 and #23? |
10-28-2020, 03:38 PM | #24 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
9 and 23 should be there as they were part of the original 1264 harness personality plug
|
10-28-2020, 03:48 PM | #25 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
So I just checked and there is 48v running from pin 3 to the run/tow switch, no more fault code being displayed. Is the controller light suppose to light up at all?
|
10-28-2020, 04:16 PM | #26 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
Yeah I got the walkaway installed and it stopped reading the 2-5 fault code when plugged in, but still stuck in putts mode. If I unhook the walkaway relay it goes right back to 2-5 and still stuck in putts mode....
|
10-28-2020, 04:17 PM | #27 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
#9 and #23 run right to that little 5 pin plastic connector that I have the walkway pulled into.
|
10-28-2020, 04:19 PM | #28 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
There is also a 3rd wire coming off of the walk away 5 pin connector, it’s a red wire but is capped off
|
10-28-2020, 05:21 PM | #29 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
Could it be the speed sensor? And thank you guys soo much for the help
|
10-28-2020, 06:28 PM | #30 |
Not Yet Wild
Join Date: Oct 2020
Location: Novi Michigan
Posts: 42
|
Re: Installing a Walkaway harness on EZGO Curtis 1268 Controller.
The motor and controller came out of a 2016 EZGO S4, would that make a difference? Would I have to get the controller reformatted or anything?
|
Tags |
1268, controller, curtis, ezgo, walkaway |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Curtis 1268 Controller | Golf Carts and Parts | |||
1268 Fault Codes, moving slow... do I need walkaway relay? | Electric EZGO | |||
Installing Curtis 1268 controller | Electric Club Car | |||
Curtis 1268 Controller | Electric Club Car | |||
Curtis 1268 400 amp controller? | Golf Carts and Parts |