2006 PDS stuck in reverse

[boonesbuggies]

Okay so may last thread has went unresponsive so here is my problem. I changed the batteries in a 2006 ezgo 36v pds and it has been stuck in reverse ever since. I can swap the wires on the controller going to the motor and make it go into forward. Everyone was quick to say that my controller was toast. Now I'm 3 new controllers and 3 new F/R switches in and still have the same issue. I have a new J1 plug with all the correct voltages going to each wire. The only thing I have noticed is the solenoid clicks when the petal is pressed but does not click again when the F/R is switched. It also has had 2 new solenoids installed. Any input would be appreciated thanks in advance.