|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-26-2019, 07:02 PM | #11 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
Not sure about the paperclip but I will be sending more pics tomorrow with a better camara. Thanks for all your help. My daughter sent me this used cart she found on the internet and I don't want to tell her it's junk. I contacted the seller and he stated no guarantee. That was one day after he delivered it..thanks again.
Sent from my SM-T810 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2019, 08:14 PM | #12 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Here. Movie night tonight. I'll start back tomorrow.
|
03-26-2019, 08:41 PM | #13 |
Gone Wild
Join Date: Feb 2019
Location: North Florida
Posts: 271
|
Re: Alltrax axe 4845 controller
I have the same controller on my cart and it is fine. It sounds like yurtle has you on the right road. I wouldn't discount the cart as junk just yet. They're pretty solid.
|
03-27-2019, 09:25 AM | #14 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Quote:
|
|
03-27-2019, 09:34 AM | #15 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
Beeper wire cut when I got it.
Sent from my SM-T810 using Tapatalk |
03-27-2019, 11:37 AM | #16 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
Photos
Sent from my SM-T810 using Tapatalk |
03-27-2019, 12:01 PM | #17 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
I can't make heads or tails out of those pics. I hoped for a pic or two of each of the MSs.
The MS that's on the side appears to have the pack positive jumper, which looks red. It also appears to have an orange coming from it. The orange should only have pack positive when it's closed, and should only be closed when the FNR is in reverse. If you can verify it has pack positive even when it's not in reverse then you need to replace that microswitch. There is a cam that rotates and has several notches that the MS levers fall into. Is it possible the spray paint or undercoating or whatever that stuff is, got into the MSs and/or cam? |
03-27-2019, 12:06 PM | #18 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax axe 4845 controller
Can you confirm the MS on top has a green wire on one terminal and a green and red wire on the other? I asked for those on a previous pic. Maybe you didn't know, you click on a thumbnail and you see a viewable size of the attached pic.
The black spade connector goes to the reverse beeper. |
03-27-2019, 12:49 PM | #19 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
Green comes from plus on battery to top of spade. Red wire connected to same spade. Blue wire connected to the other spade. On the lower micro-switch, bottom spade is connected to the orange wire. Top spade of the lower micro-switch is not connected to anything. However, there is a black wire coming from the harness that has a connector that is not connected, just hanging. I am talking to you on a tablet and it does not have a paperclip.
Sent from my SM-G935V using Tapatalk |
03-27-2019, 12:55 PM | #20 |
Not Yet Wild
Join Date: Nov 2018
Posts: 26
|
Re: Alltrax axe 4845 controller
There green wires from both harnesses are spliced together.
Sent from my SM-T810 using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
alltrax controller | Electric Club Car | |||
Alltrax controller | Electric Club Car | |||
4845 ALTRAX 400 AXE Prog. Controller | Golf Carts and Parts | |||
Will AXE 4845 burn my stock motor? | Electric EZGO | |||
36v cc installed a alltrax 4845 - results | Electric Club Car |