|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-28-2019, 10:26 AM | #1 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Curtis controllers
I ordered a new controller and they sent one that has what looks to be the wrong one for my cart. I don't know if I can use it or not and don't want to hook it up for the fun of it.
Will this new controller work on my cart? See pics, |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2019, 10:34 AM | #2 |
Gone Wild
Join Date: Sep 2017
Location: South Texas
Posts: 449
|
Re: Curtis controllers
Installing it will likely make returning a fight... wait for a response from the experts before you install it
|
09-28-2019, 10:40 AM | #3 |
Gone Wild
Join Date: Sep 2017
Location: South Texas
Posts: 449
|
Re: Curtis controllers
But they’re gonna need to know what drive system you have to give you a good answer... looks to me like the same controller with a run/tow port added but I don’t know why they would do that
|
09-28-2019, 10:47 AM | #4 |
Gone Wild
Join Date: Sep 2017
Location: South Texas
Posts: 449
|
Re: Curtis controllers
Yeah... it’s probably the right one... they just threw that in there to cover more cart models
|
09-28-2019, 11:52 AM | #5 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Re: Curtis controllers
I sent some pics and query to the seller, and am waiting on that, but I thought I might get better info here.
|
09-28-2019, 12:02 PM | #6 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Curtis controllers
You have what appears to be a 1204M or 1205M controller with 1/2 speed revers.
The four pin jack is for an external LED or a for connecting a Curtis 1311/1314 programmer. The spade lug standing by itself is the 1/2 speed reverse input. The most significant question is what type throttle does your cart have (0-5k pot box or ITS) and what type throttle is the new controller set to? |
09-28-2019, 01:08 PM | #7 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Re: Curtis controllers
attached pic is what I guess is called a 0-5 pot box. Am I right? The controller is supposed to be set for a 0-5ohm. All said the new controller should work just connecting the 3 spade connectors as the old one was, and of course the power cables, correct?
|
09-28-2019, 01:40 PM | #8 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Curtis controllers
Should work perfect! Ignore the extra pins that your old setup didn't use..
|
09-28-2019, 02:15 PM | #9 |
Gone Wild
Join Date: Feb 2019
Location: God's Country America
Posts: 883
|
Re: Curtis controllers
Could u post a picture of the bottoms of the controllers?
|
09-28-2019, 03:02 PM | #10 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Re: Curtis controllers
the new unit is a 1204M-4201, old unit is a 1204-009
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
What goes wrong inside Curtis controllers? | Electric Club Car | |||
Controllers For sale. curtis and alltrax. | Golf Carts and Parts | |||
Need to test Curtis controllers with ITS throt. | Electric EZGO | |||
who repairs curtis controllers | Electric Club Car | |||
curtis controllers | Golf Carts and Parts |