'02 CC DS Front Bearings / Hub turns rough

[battleboro]

Originally Posted by Fairtax4me

Looks like water and/or dirt intrusion into the inner bearing.
How do the bearing races look in the hub?
How did the inner seal look? Was it loose in the hub or damaged in any way?

The races looked fine. Had to knock them out with a flathead screwdriver and hammer, but not difficult

The inner seal looked fine before I bent it while removing the inner race. It wasn’t loose or damaged before.

Either way, things just looked “off”, so I’m getting new bearings and an inner seal.

Perhaps new races??? Not much more to ease the conscience.


Sent from my iPhone using Tapatalk