|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-23-2016, 07:28 PM | #1 |
Not Yet Wild
Join Date: May 2016
Posts: 15
|
'05 G27A light utility - sheave removal
I have read a number of posts regarding bolt removal. I don't have the holder, but a couple posts said an impact would do it. My impact (3/8" air and 120 PSI) won't do it. Posts or Yammy manual don't tell Rt. or Lt. hand thread. I "assume" right hand.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2016, 07:34 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: '05 G27A light utility - sheave removal
they are normal direction bolt & nut. a 1/2" impact should handle it...
|
05-26-2016, 09:33 AM | #3 |
Not Yet Wild
Join Date: May 2016
Posts: 15
|
Re: '05 G27A light utility - sheave removal
My 12 yr. old tool (260 ft.lb. when new) didn't do it. Bought a new one
w/ 700 ft. lb. max. Set on medium, piece o' cake. Thanx |
05-27-2016, 07:57 AM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: '05 G27A light utility - sheave removal
The bolt that holds the clutch on does not have to be super human tight, G2 spec is 54ftlbs. Make sure the taper is very clean on both pieces.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
REd Dash light on 2000 XG0041- pioneer utility | Gas Club Car | |||
Gear Oil Leak on G27A | Gas Yamaha | |||
G1 Primary Sheave Removal - HELP! | Gas Yamaha | |||
Pully(sheave) removal | Gas EZGO | |||
Secondary Sheave Removal and Ramp Shoe? | Gas Yamaha |