Expediter ex24

Bigbondo007 · 02-13-2017, 02:52 PM

What should I do with this. It's a 2013 Columbia expediter ex24, 24 volt, Regen. Was working fine until I pressure washed the floor and ruined the throttle sensor which is 359 bucks. Has a sep ex motor that's 5hp@24v/10hp@36v/16hp@48v. Sevcon millipak controller upgradable to 48v, and a delta q on board charger.

Sent from my SM-G935V using Tapatalk

Bigbondo007 · 02-13-2017, 02:53 PM

Rated for 750lb load carry and 1000lb tow, fits through a 36 inch door

Sent from my SM-G935V using Tapatalk

Bigbondo007 · 02-13-2017, 03:01 PM

Sent from my SM-G935V using Tapatalk

Tech Support · 04-26-2017, 03:57 PM

The accelerator is rated IP66 so pressure washing should not really have messed it up. We don't see many go bad. Is there a flash code when you turn the key on? (Blinking status LED)

VIN on that unit is EF2E2-3ZM0116. Nice handy little units. This one was used over at Norbord in Cordele.

Not the nicest paint job though now.

Bigbondo007 · 04-26-2017, 03:59 PM

It's black now, lol

Sent from my SM-G935V using Tapatalk

Bigbondo007 · 04-26-2017, 04:01 PM

Took the sensor off and disassembled and a ton of h2o came out. Got code 6, and a few others. I replaced the foot assembly and all is good now.

Sent from my SM-G935V using Tapatalk

Bigbondo007 · 04-26-2017, 04:10 PM

I work there, sat in the back for a while with a bad Armature bearing until I got it. How did you figure Vin and location?

Sent from my SM-G935V using Tapatalk

02-13-2017, 02:52 PM	#1
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175	Expediter ex24 What should I do with this. It's a 2013 Columbia expediter ex24, 24 volt, Regen. Was working fine until I pressure washed the floor and ruined the throttle sensor which is 359 bucks. Has a sep ex motor that's 5hp@24v/10hp@36v/16hp@48v. Sevcon millipak controller upgradable to 48v, and a delta q on board charger. Sent from my SM-G935V using Tapatalk
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175

02-13-2017, 02:53 PM	#2
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175	Re: Expediter ex24 Rated for 750lb load carry and 1000lb tow, fits through a 36 inch door Sent from my SM-G935V using Tapatalk
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175

02-13-2017, 03:01 PM	#3
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175	Re: Expediter ex24 Sent from my SM-G935V using Tapatalk
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175

04-26-2017, 03:57 PM	#4
Tech Support How Can I Help? Join Date: Oct 2009 Location: SW Wisc & West Central, FL Posts: 1,383	Re: Expediter ex24 The accelerator is rated IP66 so pressure washing should not really have messed it up. We don't see many go bad. Is there a flash code when you turn the key on? (Blinking status LED) VIN on that unit is EF2E2-3ZM0116. Nice handy little units. This one was used over at Norbord in Cordele. Not the nicest paint job though now.

04-26-2017, 03:59 PM	#5
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175	Re: Expediter ex24 It's black now, lol Sent from my SM-G935V using Tapatalk
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-26-2017, 04:01 PM	#6
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175	Re: Expediter ex24 Took the sensor off and disassembled and a ton of h2o came out. Got code 6, and a few others. I replaced the foot assembly and all is good now. Sent from my SM-G935V using Tapatalk
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175

04-26-2017, 04:10 PM	#7
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175	Re: Expediter ex24 I work there, sat in the back for a while with a bad Armature bearing until I got it. How did you figure Vin and location? Sent from my SM-G935V using Tapatalk
Bigbondo007 Gone Wild Join Date: Feb 2017 Posts: 175