Lights and Horn quit on my 2003 EZGO

[wingnut2000]

bump

[orangeman6]

http://www.eastcoastcarts.com/media/...c_with_PDS.pdf


This manual says its for 2001 and up. Someone please confirm, but I believe it should work for your cart. I've got a 2001 and printed the whole thing out as a reference for when I did my rebuild. Page 174 has the accessory wiring diagram.

[kgsc]

Those glass fuse holders are notorious for starting to get bad connections as they get older. You can usually spin the fuse and the circuit will come back alive. If not you may have a problem with the 12 circuit coming in. Kernal was right on the wire colors so that should give you places to look for bad connections.

[wingnut2000]

Originally Posted by orangeman6

http://www.eastcoastcarts.com/media/...c_with_PDS.pdf


This manual says its for 2001 and up. Someone please confirm, but I believe it should work for your cart. I've got a 2001 and printed the whole thing out as a reference for when I did my rebuild. Page 174 has the accessory wiring diagram.

link didn't work

[wingnut2000]

fyi. horn works now but the lights still do not

[orangeman6]

Originally Posted by wingnut2000

link didn't work

http://www.eastcoastcarts.com/tools/technical-manuals

This one just goes to the page that has all of the manuals, instead of directly to the manual. It's the first one on the page. If it doesn't work, just go to east coast carts or put "ezgo txt service manual " into the google machine and look for east coast carts in the results.

Sounds like you're getting closer with your current issue, but a manual is great to have on hand.

[wingnut2000]

PROBLEM RESOLVED.

Since my horn had started working I went back to the 3 fuse panel and found out which one was for the horn and moved it to the other fuse locations until the lights came on. when lights came on I just left fuse in that spot since I rather have lights than the horn and then I took the third fuse and put in the horn slot and now all of it works. Haven't figured out what the third fuse would be for though? brake lights? I will get a new one to replace it anyway because I don't like broke things

I am guessing when I did the fwd/rev assembly replacement I sparked something and blew the fuse for the lights. seems like I remember something sparking one time while I was working on it

[kgsc]

Glad you got it working but best of my knowledge none of the wires related to the lights are anywhere near the FnR switch. Fuse probably just failed or a loose connection. It happens

[wingnut2000]

Originally Posted by kgsc

Glad you got it working but best of my knowledge none of the wires related to the lights are anywhere near the FnR switch. Fuse probably just failed or a loose connection. It happens

I don't think so either but when I disconnected wires from battery to kill the power while I did the replacement there were three of them on the battery and I remember one of them making contact and I think one of those three is for lights

[kgsc]

There are usually 3 wires on the pack negative. High current, charger and the negative for the 12 volt circuit.