|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
01-24-2022, 04:56 PM | #1631 |
Not Yet Wild
Join Date: Jan 2022
Posts: 5
|
Re: Programming Curtis Controller
It's ok, thank you!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-06-2022, 06:56 AM | #1632 | |
Not Yet Wild
Join Date: Dec 2021
Location: Spain
Posts: 3
|
Re: Programming Curtis Controller
Quote:
I have a 1228-2701 controller with 3,1 error (PROC/WIRING FAULT). Before that the controller was in EEPROM fault state and DS2003 IC blown and I wasn't able to connect too. After replacing the IC and cloned the EEPROM from another controller (1228-2901) I can connect and change parameters. The model and serial number are coded in the EEPROM and passed to the faulty one. Is there a way to change this and correct PROC/WIRING FAULT? Can be done with a Factory or Development level? If yes, can you share it with me on how to switch from OEM to one of these higher levels? |
|
02-06-2022, 08:32 AM | #1633 |
Gone Wild
Join Date: May 2011
Posts: 266
|
Re: Programming Curtis Controller
@Adrian ...I have replied by p.m. on the wheelchair forum.
|
03-09-2022, 08:53 PM | #1634 |
Not Yet Wild
Join Date: Feb 2011
Posts: 6
|
Re: Programming Curtis Controller
Where can I send my Curtis controller to have it checked out to make sure it's good, setup for 48v, plug braking and high pedal.?
|
04-03-2022, 12:23 PM | #1635 |
Getting Wild
Join Date: Feb 2020
Posts: 138
|
Re: Programming Curtis Controller
Just skimmed this MEGA thread, here I thought an OEM handheld was the way to go but you all are using the PC version it seems
Tell me if this is legit? https://www.nocoev.com/product/1314-4402.htm#gsc.tab=0 |
04-03-2022, 12:46 PM | #1636 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: Programming Curtis Controller
Yep it’s legit but you can make your own with a little work for roughly $30..
Go back to page 114 and start reading. |
04-05-2022, 02:23 PM | #1637 |
Not Yet Wild
Join Date: Mar 2009
Posts: 30
|
Re: Programming Curtis Controller
Now that you all have figured out the software and cables.......
does anyone have a recommended setting for curtis rxv 1206ac controller? a little more speed, quicker acceleration, and more initial torque for towing? |
04-09-2022, 11:09 AM | #1638 | |
Not Yet Wild
Join Date: Apr 2022
Posts: 10
|
Re: Programming Curtis Controller
Quote:
|
|
05-11-2022, 05:41 AM | #1639 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Programming Curtis Controller
Looking for the esn info for the developer access level, Please send pm if you can help me out!
|
05-20-2022, 07:16 PM | #1640 | |
Not Yet Wild
Join Date: Dec 2017
Location: Bell, Qld, Aus
Posts: 13
|
Re: Programming Curtis Controller
Quote:
Will let you know how I go I have the software but are short on time crack registry settings |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
curtis 1206sx controller | Electric EZGO | |||
WTB used curtis 1204 controller | Golf Carts and Parts | |||
wanted curtis pmc controller | Golf Carts and Parts | |||
troubleshooting curtis controller | Electric EZGO | |||
wanted: curtis pmc controller | Golf Carts and Parts |