lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-25-2015, 02:56 PM   #1
Bubba11
Getting Wild
Club Car
 
Join Date: Jul 2011
Posts: 138
Default s1 cable

ok, another one my carts a 97 48 volt club car the S1 cable got real hot too the point the S1 lug on the motor was cherry red. the cart has a 400 amp controller and a high speed motor. the cart was hauling some weight lol and in a little hilly terrain. once we got towed back to camp i noticed that the fuse on the negative lead was almost broke at the connection. would that have caused the issue? thanks guys
Bubba11 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-25-2015, 07:57 PM   #2
Swan
Cave Dweller
 
Swan's Avatar
Club Car
 
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,232
Default Re: s1 cable

Quote:
Originally Posted by Bubba11 View Post
the fuse on the negative lead was almost broke at the connection.
what neg lead , going from what to what ?
Swan is offline   Reply With Quote
Old 01-25-2015, 10:58 PM   #3
radioman
Gone Wild
E-Z-GO
 
Join Date: Jan 2014
Location: South Georgia
Posts: 1,120
Default Re: s1 cable

Loose or poor connection on S1 lug.
radioman is offline   Reply With Quote
Old 02-02-2015, 11:43 AM   #4
Bubba11
Getting Wild
Club Car
 
Join Date: Jul 2011
Posts: 138
Default Re: s1 cable

ok thought it could have been the F/R, replaced it with another. it was not the S1 it was the S2 cable on the motor lug. the lug has a little play but the cable is tight and it still gets hot
Bubba11 is offline   Reply With Quote
Old 02-02-2015, 03:15 PM   #5
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: s1 cable

Quote:
Originally Posted by Bubba11 View Post
ok thought it could have been the F/R, replaced it with another. it was not the S1 it was the S2 cable on the motor lug. the lug has a little play but the cable is tight and it still gets hot


If the stud has play in it, the wire to the stator coil (inside the motor) is loose, so it will get hot.
JohnnieB is offline   Reply With Quote
Old 02-02-2015, 04:38 PM   #6
Bubba11
Getting Wild
Club Car
 
Join Date: Jul 2011
Posts: 138
Default Re: s1 cable

ok thanks Johhny B
Bubba11 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO




Similar Threads
Thread Forum
Shift Cable or F&R Cable Adjustment Gas Yamaha
2ga welding cable vs 2ga battery cable vs 2ga speaker cable Electric Club Car
Cable lengths??? 2 gauge cable??? OBC?? Electric Club Car
Cable ends for #2 welding cable Lifted Golf Carts
F&R single cable to dual cable? Big Block Talk!


All times are GMT -5. The time now is 10:31 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.