|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-25-2015, 01:33 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 9
|
controller cooked?
Hello Folks, here's my crisis, 1996 ezgo txt series motor, new H/D forward-reverse, new 4 gauge wires. Last week lost forward completely still had reverse, when in forward cart only shuttered but would not move. Checked voltage on everything, all looked good. Had my npx4844ez controller unhooked to see if it would reset but now that I hooked it back up as soon as I touch accelerator enough to engage solenoid the fuse coming from back of charger plug in pops. Is my controller shorted? I have checked all wiring several times, ready to run in river!!!!!! Thanks in advance for any ideas, Chad.
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-25-2015, 01:40 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: controller cooked?
You have something hooked up wrong.
|
|
|
|
|
05-25-2015, 01:46 PM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: controller cooked?
agreed, something in the solenoid activation circuit is shorted out,diode reversed maybe ?
|
|
|
|
|
05-25-2015, 06:14 PM
|
#4 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 9
|
Re: controller cooked?
Good call, small diode was fried, but cart still only shutters in forward, reverse seems fine. Could a bad solenoid cause this or is it more of a controller issue?
Last edited by chadsspot; 05-25-2015 at 06:16 PM.. Reason: added question |
|
|
|
|
05-25-2015, 07:07 PM
|
#5 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: controller cooked?
Quote:
|
|
|
|
|
|
05-25-2015, 09:29 PM
|
#6 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 9
|
Re: controller cooked?
Okay i'll try that, if that works what exactly does that point to as the faulty component?
|
|
|
|
|
05-26-2015, 08:37 PM
|
#7 |
|
Not Yet Wild
Join Date: Dec 2014
Posts: 9
|
Re: controller cooked?
Found it, Bad microswitch on my brand new f/r switch. swapped out with a spare I had all is good.
|
|
|
|
|
| Tags |
| npx4844ez |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
| I think I cooked my POT box | Electric EZGO | |||
| Cooked a battery | Gas Club Car | |||
| Cooked | Electric golf carts | |||
Linear Mode
