|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-08-2017, 03:58 PM | #11 | |
Not Yet Wild
Join Date: Jun 2013
Location: Fort Mill SC
Posts: 36
|
Executioner and Alltrax XCT 500 settings?
Quote:
This is my settings now and still no change Tops out around 5100 rpms ? Also Tried auto cal reset and it gave me a failed error message??? |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-08-2017, 04:15 PM | #12 |
Gone Wild
Join Date: Apr 2015
Location: NorCal
Posts: 718
|
Re: Executioner and Alltrax XCT 500 settings?
At least know we know regen is not interfering with it. If you are getting 100% throttle readings, I doubt the reset would help. When I was running the wrong map for my motor, I could not get over 48xx. The new one bumped it up to 52xx. Is that the correct speed map for yours? You might be running out of HP and can't overcome drag and friction at that point. Alltrax support has been very helpful getting mine dialed in.
|
07-08-2017, 04:25 PM | #13 | |
Not Yet Wild
Join Date: Jun 2013
Location: Fort Mill SC
Posts: 36
|
Re: Executioner and Alltrax XCT 500 settings?
Quote:
It has been sent to me with the executioner map already programmed. I am getting 100% throttle according to the monitor. I have emailed alltrax twice with this question several weeks ago but have not gotten a response. Sent from my iPhone using Tapatalk |
|
07-08-2017, 04:51 PM | #14 |
Gone Wild
Join Date: Apr 2015
Location: NorCal
Posts: 718
|
Re: Executioner and Alltrax XCT 500 settings?
Sorry to hear that. Maybe get your vendor involved to see if the map will allow you to achieve that RPM given your equipment.
One last stab in the dark here, but how are your tire pressures? If too low, rolling resistance can really eat up the HP at the top end. |
07-08-2017, 05:05 PM | #15 | |
Not Yet Wild
Join Date: Jun 2013
Location: Fort Mill SC
Posts: 36
|
Re: Executioner and Alltrax XCT 500 settings?
Quote:
Tires are 25psi per Robbie at Plum Quick. Thanks for your help. Sent from my iPhone using Tapatalk |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax field map for Plum quick executioner | Electric Club Car | |||
Alltrax settings | Electric EZGO | |||
Alltrax settings | Extreme DC! | |||
Alltrax dcx settings | Electric EZGO | |||
Plum Quick Executioner & Alltrax DCX500 | Golf Carts and Parts |