|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-16-2014, 08:33 PM | #1 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Easy behind dash & key switch access 01 TXT
Hey EZGO friends, I hope all is well in cart world. Simple question? How do I gain access behind the key switch on a 01 txt EZGO? Seems like a lot of work to drill pop rivets out or remove front cowl just to gain access to all the front wiring from the key switch. Any advice? Trying to install led battery pack meter...
Thanks Steve |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2014, 08:44 PM | #2 |
Guest
Posts: n/a
|
Re: Easy behind dash & key switch access 01 TXT
they are push rivets ... just push out center and remove
|
04-16-2014, 09:01 PM | #3 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: Easy behind dash & key switch access 01 TXT
Thanks CTD, mine look like alum so didn't want to drill just to gain access. Steve
|
04-16-2014, 09:44 PM | #4 |
Guest
Posts: n/a
|
Re: Easy behind dash & key switch access 01 TXT
if , and i mean if , someone replaced them then drilling would be only option .. it is easier to remove switch plate than cowl... removing cup holder is no help
|
04-17-2014, 08:57 AM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Easy behind dash & key switch access 01 TXT
You can also remove the "dust cover" in the front of the buggy. Just remove the EZGO emblem and you can reach up front.
|
04-17-2014, 09:00 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Easy behind dash & key switch access 01 TXT
I think is just blind access and the key switch plate is the way the keyswitch was intended to access. Drill out the 2 pop rivets someone used and replace them with like rivets or screws or OEM push rivets when your work is done. - You will be glad you did.
|
04-17-2014, 09:22 AM | #7 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Easy behind dash & key switch access 01 TXT
Agreed, but I routinely azccess my dash this way to make mods. I have a non-standard dash, which is bolted in place, and takes two people to accomplish.
Didn't know the task that was required. |
04-17-2014, 09:24 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Easy behind dash & key switch access 01 TXT
|
04-17-2014, 07:52 PM | #9 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: Easy behind dash & key switch access 01 TXT
Thanks all I just removed pop rivets at the switch plate.
Steve |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to access panel by key and transmission switch | Electric EZGO | |||
Easy way to get in behind the dash | Gas EZGO | |||
How do I access switch panel? | Electric EZGO | |||
How do I access switch panel? | Electric EZGO |