|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-05-2014, 08:08 PM | #11 | |
Not Yet Wild
Join Date: Aug 2014
Posts: 7
|
Re: Medalist series no controller output
Quote:
Black wire on ITS has 14.1 at pedal box and at controller White wire has .1 up to 1.7 as pedal is depressed Also swapped ITS and no change PS Thank you for helping me |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-05-2014, 08:10 PM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: Medalist series no controller output
No problem - You have power to the control. Your throttle signal is within acceptable range. There is no output. This is the perfect excuse to upgrade!
|
08-05-2014, 08:14 PM | #13 |
Not Yet Wild
Join Date: Aug 2014
Posts: 7
|
Re: Medalist series no controller output
So your thinking controller also?
What controller do you suggest |
08-05-2014, 08:29 PM | #14 |
Not Yet Wild
Join Date: Aug 2014
Posts: 7
|
Re: Medalist series no controller output
Oh heck yeah controller is bad just took it off and it sounds like it has rocks in it should of done that to start with but never heard one rattle like that
Thank you Scottyb for the help |
|
|
Similar Threads | ||||
Thread | Forum | |||
Voltage output from controller to accelertor pedal magnet ? | Electric golf carts | |||
Resistor, Controller, Series, PDS, DCS, AC, Medalist, Marathon, TXT... | Electric EZGO | |||
Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car | |||
Curtis 12069-5501 Controller Low Output Voltage | Electric EZGO | |||
No output on 488 amp. controller | Electric EZGO |